Identificador: 324
Abierta
ID de articulo : # 324 se ha agregado a su lista de deseos.
.jpg)
Descripción
PARTE # SIL-DC-MBS300-1 - SIERRA DE MESA 12" - MOTOR 5 HP - 1 FASE
PARTE # SIL-DC-MBS300-3 - SIERRA DE MESA 12" - MOTOR 5 HP - 3 FASE
MOTOR: 5 HP, 220V, 60 Hz, 1 o 3 FASES
DIAMETRO DEL DISCO 12"
CAPACIDAD MAXIMA DE CORTE A 90 GRADOS: 4"
CAPACIDAD MAXIMA DE CORTE A 45 GRADOS: 2-3/4"
DIAMETRO FLECHA: 1"
VELOCIDAD DEL DISCO: 4000 RPM
MEDIDAS DE LA MESA: 48" X 30"
ALTURA MESA: 34"
MAXIMO CORTE A LA DERECHA DEL DISCO: 38"
PESO: 320 KGS
TIPO DE EMPAQUE: 2 CAJAS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
CALIPER DE BOLSILLO – STARRETT 1025
PARTE: 2EB-STA-1025-6 – CALIPER DE
BOLSILLO – STARRETT 1025
NUEVO CON GARANTIARange 0
in to 4 3/4 in, Graduations 1/32 in, 1/64 in, Accuracy /-0.003 in, Material
Stainless Steel, Dimension Type Fractional Inch, Graduations - Lower Scale 1/32
in, Graduations - Upper Scale 1/64 in, Jaw Actuation Type Slide, Jaw Depth 1
3/8 in, Maximum Measurement - Decimal Inch 4.75 in, Maximum Measurement -
Fractional Inch 4 3/4 in, Measurements Inside, Outside, Measures Depth No,
Measures Inside D...
AMXmachinery
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12596 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 RPMModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil.Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
PARTE: 2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
PARTE:
2GM-HBR-05375-4R – ROLADORAS DE 4 RODILLOS – 5 – 10 PIES
Nueva con garantía
2GM-HBR-05375-4R – ROLADORA
DE 4 RODILLOS - 5’ x 3/8”, 7.5 HP, 220/440V, 3PH
2GM-HBR-06375-4R – ROLADORA
DE 4 RODILLOS - 6’ x 3/8” , 7.5 HP, 220/440V, 3PH
2GM-HBR-08375-4R – ROLADORA
DE 4 RODILLOS - 8’x 3/8” , 10 HP, 220/440V, 3PH
2GM-HBR-10375-4R – ROLADORA
DE 4 RODILLOS - 10’x 3/8” , 10 HP, 220/440V, 3PH
AMXmachinery
ENGOMADORA 1 LADO – 63” ANCHO - QUICK
PARTE: 12132
- ENGOMADORA 1 LADO – 63” ANCHO - QUICK
COMO NUEVA – NUNCA USADA
Width capacity: 63"
Maximum opening: 1-3/4"
Feed rate: 64 FPM (single speed)
8.27" diameter grooved acid and heat resistant SBR
rubber covered glue rolls
6.9" diameter hard rubber covered doctor rolls
Glue spread and material thickness are manually adjusted
made by turning chrome plated hand wheels
Aluminum drip pan catches clean up water
Powered by 2 HP motor
Includes roll guards...