ID: 355
Open
ID de articulo : # 355 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
PARTE: 3YH-YFC-18 – SIERRA TRONZADORA – 7.5 HP – SIERRA 18” – AMX MACHINERY
MAQUINA EN FOTO: IZQUIERDA
OPCIONAL: DERECHA
SPECIFICATIONS
● Cutting capacity (Thickness x Width)：2" x 12", 3" x 11", 4" x 10"
● Cycle speed：45 cuts/min
● Cycle operation：Pneumatic
● Saw blade diameter (Option)：ø18"
● Saw arbor diameter：ø1"/ 30mm
● Saw blade speed ：3600 rpm
● Dust exhaust diameter：ø4" x (1)
● Saw arbor motor：7.5HP / 10HP
● Table size：660X 690mm
● Net weight：350 kgs
● Gross weight：410 kgs
● Packing dimensions(LxWxH)：770x 780x 1350mm
FEATURES
● Table surface is precision ground, assuring cutting accuracy.
● The sawblade on the left side is standard machine, shown as picture. (Option, the sawbalde on the right side)
● Cycle speed is adjustable and up to 45 strokes per minute.
● Motion cycle is pneumatic operated and controlled by foot switch. (Option, dual hand buttons)
● Powerful 7.5HP (10HP) motor drive.
● T-clamp is easily adjusted for workpiece thickness variation.
● Convenient and fast sawblade replacement.
● Proper dust collection design to keep cabinet clean.
Roller Conveyor (Option)
Standard length is 1M. Available in any length.
Outfeed roller conveyor is with extension stop and aluminum extruded rear fence.
Extension Stop (Option)
Extension stop is used on outfeed roller conveyor. It is convenient for length stop and for repetitive cutting in a mass production line.
There are 3 kinds of extension stop, fix stop, flip stop and lift stop.
Safety Switch (Option)
When operator approaches the cutting area, the safety switch controls T-clamp and unable to cut workpiece.
Safety Guard (Option)
The complete safety for fast cutting operation and to avoid operator to approach the cutting area.
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery
CALDERAS DE BIOMASA – DESDE 3 KWT HASTA 30 MW TERMICOS
PARTE: 4UN-001
- CALDERAS DE BIOMASA – DESDE 3 KWT HASTA 30 MW TERMICOS
Calderas desde 300 KW hasta 30 MW térmicos, para agua
caliente, sobre calentada, vapor saturado y sobre aquesido, aceite térmico, las
cuales pueden quemar, o biomasa convencional, o biomasa no convencional.Valorizamos la biomasa y los subproductos derivados de
procesos agrícolas y industrialesTransformándolos en energía limpiaCombustible Biomasa – Rendimiento Alta Tecnología –
Emisiones Bajo a Zero Carb...
AMXmachinery
INDEX TABLE
PARTE # 2EV-0366 - INDEX TABLE - EVANS 0366Para fabricar cubiertas de cocina usando adhesivo de contacto- 80 PSI required- Standard Features:- Adjustments up to 61" wide- Adjustable alignment of laminate to core stock- Air pressure regulator. Pneumatically operated core positioning- Assembly required. Shipped KD- Crated weight 1000 LBS. Shipping dimensions 168” long X 25” wide X 24” highOptional:- Riser base to 37”
AMXmachinery
SIERRA RADIAL - BIG 800CE - 4 HP - DISCO 15.75”
PARTE: 2MA-800CE -
SIERRA RADIAL - BIG 800CE - 4 HP - DISCO 15.75”
NUEVA CON GARANTIAHeavy castings and the eight bearing saw
carriage makes this machine very accurate and rigid. European quality made to last!4 HP, 2800 RPM motor400 mm (15.75") Blade diameter capacity
(Not included)30 mm Arbor diameter73.23" x 45.08" Table size27.75" Max crosscut length on 3/4"
thick material (90 deg)0 to 40.5" Rip capacity4.9" Max depth of cut19.68" Max cut length at 45 deg on right
side12.20" Max cut...
AMXmachinery
LIJADORA DE BANDA ANCHA – 36” ANCHO – 1 BANDA – TIMESAVERS
PARTE: 12219 – LIJADORA DE BANDA ANCHA
– 36” ANCHO – 1 BANDA – TIMESAVERS
USADA – BUENAS CONDICIONES
0
to 8" thickness capacity, (manually adjusted via handwheel)
20
HP, 230/60/3 combination 4" diam. drum & platen sanding head
(60
- 65) durometer rubber covered contact drum
1
HP, 230/60/3 feed conveyor motor
(15
to 45 ft/min.) variable conveyor feed via variable speed pulley
24"
infeed & 8" outfeed conveyor, (4 jack screws for raise & lower)
Automatic
...