Identificador: 47
Abierta
ID de articulo : # 47 se ha agregado a su lista de deseos.
Descripción
DESORILLADORAS
LM E25G Edger:
- 25 HP Kohler® engine.
- 13" carbide tipped split blades.
LM E26D Edger:
- 26 HP CAT® diesel engine.
- 15" carbide tipped split blades.
CARACTERISTICAS ESTANDAR:
Hydraulic feed of the board through the blades
Hydraulic adjustment of the moveable blade and board setworks.
4 industrial infeed and 4 outfeed adjustable rollers.
7' infeed and 7' outfeed roller bed.
Highway approved trailer with 15" tires and 3500 lb. capacity axle.
Easy to read scale stick at the front of the edger.
Massive structural frame made of 3" x 6" x 1/4" wall tubing.
Weighs approximately 3500 lbs.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 3SD-RVPL – LINEA SECADO – CHAPA – ROTATIVA - 2 NIVELES
PARTE: 3SD-RVPL – LINEA SECADO – CHAPA – ROTATIVA - 2 NIVELESHornos Secadores para Chapa Natural de MaderasNueva con garantíaOperación- Manual- Semi Automático- Completamente AutomáticoLínea Secado Horizontal- Características- Horizontal air circulation with vertical air blowing- Variable Frecuency DriveLínea de Sacado Vertical- Características - Vertical design - Energy saving - Small space - Economic Price - Less labor cost - High drying efficiency - Low operational costsFuentes ...
-500x500.jpg)
AMXmachinery
PARTE: 12629 - CONTORNEADORA – 2 FRESADORAS - BALESTRINI – MINI C
PARTE: 12629 - CONTORNEADORA – 2 FRESADORAS - BALESTRINI –
MINI C
USADA – BUENAS CONDICIONES
AMXmachinery
LIJADORA PARA CURVOS Y RECTOS BRUSA LT-80
PARTE # 10070 - LIJADORA PARA CURVOS Y RECTOSMARCA: BRUSAMODELO: LT-80PARA PULIR- PALO DE ESCOBA- REDONDOS- MANGO DE HERRAMIENTA- MOTOR ALIMENTADOR, 0.25 KW, 220 VOLTS, 60 Hz- MOTOR PRINCIPAL LIJA, 5 HP, 220/440 VOLTS, 60 Hz, 1450 RPM- MOTOR OSCILADOR, GIRA PARA REDONDEAR, 5 HP, 220/440 VOLTS, 60 Hz, 1400 RPM- AJUSTE MANUAL, DIAMETRO ANCHO DE PIEZA PARA CADA LIJA 0 - 80 mm
AMXmachinery
ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59” - FRIULMAC
PARTE: 12415 – ESPIGADORA DOBLE DE CADENA - CAPACIDAD 59”
- FRIULMAC
USADA - BUENAS CONDICIONESModel
ContouramatWorkpiece
Length: 115 - 1500mm (4.52" - 59")Workpiece
Width: 30 - 250mm (1.2" - 10")Workpiece
Thickness: 12 - 50mm (.5" - 2")Left
& Right Top & Bottom Trip SawsTrim Saw
Motors are 4 HP Each (Two Per Side)Trim Saw
Blade Diameter: 125 - 180mmLeft
& Right Profiling/Cope StationsCope
Motors: 7.4 HP EachProfiling
Cutterhead Diameter: 160 - 220mmHopper
Feed
...