Identificador: 667
Abierta
Descripción
PARTE # 11633 - REASERRADORA 4 CABEZALES - MOTORES 40 HP - FASTLINE
EN BUENAS CONDICIONES DE OPERACION
MAQUINA DE USO RUDO INDUSTRIAL CONTINUO
MOTORES 40 HP, 480V, 3 FASES C/U
DIAMETRO DE CABEZALES 41"
GUIAS TIPO DEDUSTER PNEUMATIC
RUEADAS DE 1-1/2" DE ANCHO PARA USAR SIERRA CINTAS DE 2"
ALIMENTADOR HIDRAULICO
OPCIONALES:
REGRESADOR
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
AFILADOR SIERRA CINTA 30-40 MM
PARTE # 2LSL-99990000506 - AFILADOR AUTOMATICO - ANCHOS 30-40 MMNUEVA CON GARANTIAAFILA SIERRAS DESDE 30 A 40 MM ANCHO EN 1 SOLA PASADAPARA DIENTES ENTRE 18 A 23 MMThe bandsaw blade grinder shall only be used for bandsaw blades with hardened saw teeth. The pitch shall be 25 mm and the bandsaw blade width shall be 32 mm.Motor Data, Grindlux 4000Voltage, V: 12Speed, rpm: 2800Peripheral speed, m/s: 22Power, W: 90Amperage, A: 7.5Grinding disc, mm: 150 x 6 x 16Fuse, A: 12 / 0.25Weight: 18.1 lbs. (8.2...
AMXmachinery
PLACA CHAPA - GRABADA
PARTE: P-CHAPA-002-G - BASE RECTANGULO - CHAPA - COLOR CAOBAChapa de Madera Natural5/8” espesor 1 ranura vertical y 1 ranura horizontal por atras Medidas: 8 x 10" 9 x 12" 10.5 x 13"
AMXmachinery
RESACADORA SENCILLA – 60” CAPACIDAD LARGO
PARTE: 2FA-NXL-48 – RESACADORA SENCILLA
– 60” CAPACIDAD LARGO
NUEVA CON GARANTIA
HASTA 800 RESAQUES/HRStandard FeaturesCutter Head is Never ExposedTable Moves w/Dual Air Rams Á Linear BearingsDouble Clamp System Machine SpecsDimensionsLength: 60"Width: 90"Height: 50"Table Height: 37" Power20 HP Electric Motor: 208/230/480/3/60 TEFCCompletely pre-wired motor starter with start/stop
buttons and circuit overload protection SpecificationsArbor & Bearing Size: 2"Approx. 2000 lbsTabl...