Identificador: 675
Abierta
ID de articulo : # 675 se ha agregado a su lista de deseos.
Descripción
PARTE # 11802 - ASTILLADOR - SCHUTTE 1360
IN GOOD CONDITIONS, AS-IS
Top infeed is 21-1/2" x 23".
Currently has 1" thick swinging hammers.
Screen included (not installed) has 1/2" dia. round holes.
Has been modified to a pneumatic discharge.
Includes sub base, motor pedestal and permanent magnet installed in infeed chute.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ALIMENTADORA PANELES
PARTE # 2EV-8100 – STANDARD PANEL FEEDER – EVANS 8100Hydraulic 4 Corner Cable LiftTouch Screen ControlsLaser Height SensorNEMA 12 Enclosure460 Volt Fused Disconnect5 HP Hydraulic Power PackPanel Size: up to 5’x10’Panel Thickness: 3/8” to 1-1/2”Lift Capacity: 7000 poundsElectrical: 230/460 V, 3 PH, 60 Hz, 480 volt, 3 phase, 60 hzOptions:- Upgrade for 5’ x 10’ or 5’ x 12’ materials and increase lift capacity to 8000 pounds. (option 8200)- Upgrade for remote hand pendant control...
AMXmachinery
SIERRA CINTA CENTAURO 31"
PARTE # 1RU-CE-R800-3 - SIERRA CINTA CENTAURO 800MMDiametro de las volantes 800 mm Inclinacion de la mesa 15grados Fuerza del motor 15 H.P. 3 fasesPeso neto aproximado 700 Kgs. Altura maxima de la guia 400 mm. Distancia entre sierra y columna 780 mm Ancho maximo de sierra 80 mm. Largo maximo de sierra 5530 Velocidad de la banda de sierra 28.5 mts/segundo Altura de la mesa desde el piso 950 mm Dimensiones de la mesa 1060 x 800 mm.
AMXmachinery
EXTRACTOR DE TURBINA - MOTOR 5 HP
PARTE:
12292 - EXTRACTOR DE TURBINA - MOTOR 5 HP
USADO - MUY BUENAS CONDICIONES - REVISADO Y CHECADO
MOTOR 5 HP, 220V, 3 FASES
3500 RPM
ASPAS METALICAS
ENTRADA REDONDA: 8”
DIAMETRO
SALIDA CUADRADA: 5.5”
X 7”
MEDIDAS TOTALES: 59
CM ANCHO X 52 CM FONDO X 62 CMQ ALTO
AMXmachinery
TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
PARTE # RT-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear
Driven Spindles on 32mm Centers
Index
Pins
3
HP Spindle Drive Motor, TEFC
10mm
Bored Collets
(12)
Right Hand, (11) Left Hand
12″
Throat Depth
60″
Back Fence With (4) Stops
24″
X 48″ Work Table Surface
(2)
Spring Operated Hold Downs
Wired
3-Phase 240/480 Volt, 60 Hz.
Pneumatic
Driven Boring Cycle
Tooling
Not In...