Identificador: 788
Abierta
ID de articulo : # 788 se ha agregado a su lista de deseos.
Descripción
PARTE # 11799 – LIJADORA DE CEPILLOS – QUICKWOOD
IN GOOD CONDITIONS
- MODEL: RO-1100
- (460/60/3 electrics)
- 44" wide x 4" thick max. work-piece dimensions
- (2) counter-rotating "carrousels" with (4) rotating sanding heads each
- (8) rotating "hex" spindles can be equipped with a variety of materials
- (3 to 16) RPM of carrousel and (300 to 1,200) RPM variable spindles
- Electronic digital speed readouts
- (33) 5" diameter "quick discs" per spindle, (264) total
- 6 HP main motors, 1.5 HP rotation motors
- 2.5 HP feed conveyor belt motor with .5 HP conveyor up/down motor
- (6 to 46) FPM feed speeds, (variable speed pulley)
- Vacuum style feed conveyor with 10 HP vacuum turbine motor
- (4) 6" diameter dust outlets, (6,650 cub. Ft./hr required)
- 6' x 10' x 7' approximate overall dimensions
- Weighs approx. 3,500 lbs.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12449 - MESA DE TIJERA - HIDRAULICA - 0.60 x 1.22 METROS - 3000 LBS
PARTE: 12449 - MESA DE TIJERA - HIDRAULICA -
0.60 x 1.22 METROS - 3000 LBS
USADA - BUENAS CONDICIONES
AMXmachinery
PARTE: 1SL-DC-WP0015 - CEPILLO 15" ANCHO - MOTOR ABAJO 3 HP, 2 o 3 FASES
PARTE: 1SL-DC-WP0015 - CEPILLO 15" ANCHO - MOTOR ABAJO 3 HP, 2 o 3 FASESNUEVO CON GARANTIAMOTOR: 3 HP, 220V, 60 Hz, 1 o 3 FASESMOTOR ABAJOCAPACIDAD DE CORTE: 15" X 8"MAX. PROFUNDIDAD DE CORTE: 1/8"VELOCIDAD DE CABEZAL: 5250 RPMVELOCIDAD DE ALIMENTACION: 16 Y 30 PIES/MINMEDIDAS: MESA CON EXTENSION DE RODILLOS: 15" X 40"CANTIDAD DE CUCHILLAS: 3 PIEZASPESO: 202 KGSTIPO DE EMPAQUE: 1 CAJA
-500x500.jpg)
AMXmachinery
LIJADORA BANDA ANCHA – 3 LIJAS - 52” ANCHO - COSTA
PARTE: 12350 - LIJADORA BANDA ANCHA – 3 LIJAS - 52” ANCHO - COSTA
USADA - MUY BUENAS CONDICIONESLijadora marca COSTA modelo ACCC3 1350Útil de lijado 1350mmSubida bajada motorizadaIndicación digital altura mesaVariador de velocidad electrónico avance mesa1er grupo rodillo 90shores2on grupo rodillo 80shores3er grupo rodillo 70shoresSoplador en el 3er grupoExclusión neumática en los 3 gruposRegulación neumática 3er grupoNormativas CE
Maqu...
AMXmachinery
SIERRA DE PANELES
PARTE # 2DO-CONCEPT-2600 - SIERRA DE PANELES AUTOMATICAAn Innovative and Surprisingly Affordable Beam / Panel Saw ... 100% Made in ItalyAs compared to a Sliding Table Saw or Vertical Panel Saw, Concept 350 is more accurate, is easier to operate, is much safer, and can be up to 3x more productive !Allows the small to mid-sized shop to advance with capacity and accuracy previously only available to larger operations with much larger machinery budgets. Occupies about the same footprint as a sl...