Identificador: 810
Abierta
ID de articulo : # 810 se ha agregado a su lista de deseos.
Descripción
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
8.5 ft. wide with approximately 6 clamps per section
Clamps are standard 2-1/2” high jaws by 32” opening
Includes air tightener and panel flattener
Machine was new in 1983
Good conditions
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12169 – SIERRA OPTIMIZADORA – DIMTER WEINIG S50
PARTE: 12169 – SIERRA OPTIMIZADORA –
DIMTER WEINIG S50
USADA – MUY BUENAS CONDICIONESVideo1: https://vimeo.com/541891991
-500x500.png)
AMXmachinery
TROMPO 7.5 HP - INDUSTRIAL - USO RUDO
PARTE # 2EX-ET-150 - TROMPO - MOTOR 7.5 HP - CON FLECHA DE 1-1/4"PARTE # 2EX-ET-160 - TROMPO - MOTOR 10 HP - CON FLECHA DE 1-1/4”Nuevo con garantiaEngineered for continuous industrial use, shapers are great machines for demanding applications. The large work area, reversable spindle, optional digital readout, and powerful motors ensure clean, safe and efficient production.3 spindle speeds: 5.5, 7.5 and 10K RPMReversableMagnetic starterPrecision fence assemblyTable insertsFront access pan...
AMXmachinery
BOMBA HIDRAULICA - 3 HP - 2,500 LBS - TANQUE 60 LTS - VIKERS
PARTE:
1ZU-001 - BOMBA HIDRAULICA - 3 HP - 2,500 LBS - TANQUE 60 LTS - VIKERS
USADA - BUENAS CONDICIONESMOTOR 3 HP, 220/440V, 3 FASES, BALDOR2,500 LBS PRESION3 GALONES/MIN
TANQUE 60 LTS
AMXmachinery
SIERRA CINTA – VOLANTES 36” – 20 HP - CON ALIMENTADOR – STENNER
PARTE: 12227 – SIERRA CINTA – VOLANTES 36” – 20 HP - CON
ALIMENTADOR – STENNER
USADA – MUY BUENAS CONDICIONES
Wheel
Diameter: 36"
Max.
Bandsaw Width: 100mm
Maximum
Depth of Cut: 370mm
Saw
Motor: 20 HP, 230/460v, 3ph
Feed
Motor: 0.55 HP, 230/460v, 3ph
Feed
Speeds: 7.5, 15, 22.5, and 30 m/min (Need to Change Belt)
Table Size: 31" x 37"