Identificador: 825
Abierta
ID de articulo : # 825 se ha agregado a su lista de deseos.
Descripción
PARTE # 10160 – TORNO COPIADOR PARTES IRREGULARES – GENARI
En buenas condiciones de operacion
4 Posiciones copiadores, mas 1 posicion para la plantilla
Incluye: 11 plantillas de aluminio y 19 plantillas de madera
Motor de rotación: 3 HP, 220V, 3 Fases, 60 Hz
Motor de traslación: 1 HP, 220V, 3 Fases, 60 Hz
Motor de lijado: 1 HP, 220V, 3 Fases, 60 Hz
Se coloca plantilla de madera o aluminio
Hace 4 replicas al mismo tiempo, toma aprox. 5 minutos en cargar, tornear y descargar las piezas
Capacidad de producción: 400 piezas por 8 hrs
Capacidad largo: de 10" a 50" largo
Capacidad grueso: de 1" a 5-1/2"
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...
AMXmachinery
PARTE: 2CA-RM150 - BASTONERA – CAPACIDAD 1” - 5” DIAMETRO
PARTE: 2CA-RM150 - BASTONERA -
CAPACIDAD 1” - 5” DIAMETRO
NUEVA CON GARANTIAThe unit is designed solely for shaping of round poles in wood working factory.The 4-stage speed feeding of square workpiece into cutting position by means of feed rollers may continuously push out shaped round poles in full automatic.The cutting head has been proven flawless through experience and study of many years.The unite cuts out perfectly round rod or stick, such as flag pole, rattan, acrylic molded board...
AMXmachinery
LAMINATE SLITTER
PARTE # 2EV-5010 - LAMINATE SLITTER - EVANS 5010Laminate Slitter, 6" capacity- 110 Volt, 1 Ph., 1/3 HP,Standard Features:- 6" capacity- 70 feet per minute- 3-blade system for inlay quality cuts- Self-aligning fence- Crated weight 240 LBS. Shipping dimensions 37” long X 24” wide X 29” highOptional:- 220 Volt 50 Hz (export)
-500x500.jpg)
AMXmachinery
CEPILLO NEWMAN 500 - 4 CARAS
PARTE:
11763 - CEPILLO NEWMAN 500 - 4 CARAS
11 - CEPILLO NEWMAN
500 - 4 CARAS