PARTE: 2EX-IV-MBG04NA - COMPUERTA AUTOMATICA PARA COLECTOR DE POLVOS - 4"Electrically driven 4″ Metal Automatic Blast Gate. Installed between the dust exhaust of a power tool and the main dust collector ducting. Includes metal 4″ diameter blast gate and approved power supply.

PARTE: 2EX-DA-CA12 - ANILLO DE ACOPLECompanion angle rings are for end dust collector connections when a smooth interior surface or intermediate stiffing is required. 

PARTE: 2EX-IV-MBG06NA - COMPUERTA AUTOMATICA PARA COLECTOR DE POLVOS - 6"Electrically driven 6″ Metal Automatic Blast Gate. Installed between the dust exhaust of a power tool and the main dust collector ducting. Includes metal 6″ diameter blast gate and approved power supply.

PARTE: 2EX-DA-EC04 - TAPADERA PARA TUBODust collection end caps are used to close off raw ends of ductwork pipe or fittings.

PARTE: 2EX-DA-SW0404 - CONECTOR EN YOffers wye branches for splitting a branch or trunk line into two separate branches with trunks available in 4 to 16 inch diameters and branches available in 3 to 10 inch diameters.

PARTE: 2EX-DA-FS04 - RECOGEDOR DE PISO - METALSet up a sweeping station at convenient locations to sweep wood dust and debris directly into your dust collection system.EconomicalQuick and effective floor cleaningBlast Gate sold separately

PARTE: 2EX-DA-GATE04SC- COMPUERTA PARA COLECTOR DE POLVO - LIMPIEZA AUTOMATICAAirflow blast gates are used to balance and divert the flow of air when only using a machine for a limited time. Offers blast gates in both standard and self-cleaning and in a variety of diameters ranging from 3 to 16 inches.

PARTE: 2EX-DA-BJ04- ARTICULACION DE BOLABall joints are typically used on CNC machinery to relieve stress on flexible dust hose created by the movement of the CNC machine.

PARTE: 2EX-DA-GATE03- COMPUERTA PARA COLECTOR DE POLVOAirflow blast gates are used to balance and divert the flow of air when only using a machine for a limited time. Typhoon offers blast gates in both standard and self-cleaning and in a variety of diameters ranging from 3 to 16 inches.

PARTE: 2EX-DA-OCP03 - COPLE EXTERIOROffers inside and outside couplers ranging from diameters of 3 to 20 inches. Fitting-to-fitting joints use outside couplers, while pipe-to-pipe joints use inside couplers. No coupler is required for pipe-to-fitting joints.

PARTE: 2EX-DA-ICP03 - COPLE INTERIOROffers inside and outside couplers ranging from diameters of 3 to 20 inches. Fitting-to-fitting joints use outside couplers, while pipe-to-pipe joints use inside couplers. No coupler is required for pipe-to-fitting joints.

PARTE: 2EX-DA-LT0404 - CONECTOR DE RAMAOffers lateral tee branches for branching a main trunk line with trunks available in 4 to 18 inch diameters and branches available in 4-16 inch diameters.

PARTE: 2EX-DA-SR0403 - REDUCTOR DE TUBERIA DE ACEROOffers reducers for reducing the size of a branch or trunk line to connect a smaller pipe or hose. Main diameters are available in 4 to 20 inches and reduced diameters are available in 3 to 18 inches.

PARTE: 2EX-DA-EL4503 - CONECTORES DE CODO - 45° & 90°