PARTE: 2CA-SM-65MO – MOLDURADORA – 1 LADO SUPERIOR – 6” ANCHONuevo con garantíaFeatures:Powered pneumatic upper & lower pressure rollers for through feeding and precise cutting.Precision ground cast iron table for durability.Rigidly mounted alloy steel spindle provides accurate vibration-free power transfer.Heavy-duty sheet metal frame.Heavy-duty alloy spindle for durability & run out free performance.Spindle height adjustment by precision rack & pinion gears.Magnetic overload switch fo...

CANTEADORA AUTOMATICA         PARTE: 2CK-MX350MRIs an entry-level edgebander with pre-milling that is the perfect blend of quality and affordability.  With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system which can either...

CANTEADORA AUTOMATICA       PARTE: 2CK-MX350MIs an entry level edgebander with pre-milling that is the perfect blend of quality and affordability.  With fine attention to detail and quality componentry,  can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush trimming, PVC scrapi...

CANTEADORA AUTOMATICA                   PARTE: 2CK-MX340M Is an entry level edgebander with the perfect blend of quality and affordability.  With fine attention to detail and quality componentry  can output high quality edges on cabinet parts and more. This machine is equipped with end trimming, flush trimming, PVC scraping, and buffing.  User friendly controls and adjustments allow for efficient changeovers of edge tape thicknesses between 0.4mm & 3mm.Compact design makes it the i...

ARMADORA DE CAJONES              PARTE: 2CK-JEN60Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides.  The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching.  With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machin...

ABRAZADERA PARA ARMADORA DE CAJONES          PARTE: 2CK-DWMOffers the rugged construction and ease of set-up of high production machines at a fraction of the price.   Quickly clamp your drawer boxes precisely and square ever time.Quick setting drawer box clampStrong machine structure ensures square drawer boxesErgonomic design for convenient loading and unloadingCapable of clamping a wide range of drawer types: dovetail, dowel, tongue & groove, and dadoFast changeover between various draw...

ENLAZADORA CNC          PARTE: 2CK-CN600Provides optimal flexibility & output in the production of dovetail drawer boxes. The user friendly touch screen interface allows the operator to select from a range of standard dovetail joints as well as program the spacing or pitch of the dovetails.  This allows for maximum flexibility to ensure the optimal aesthetic result.  The dovetail milling unit can also pre-score the workpiece to ensure the best possible finish. In addition, the machining s...

COLECTOR DE ASERRIN 10 HP            PARTE: 2CK-DBS10Is a high efficiency indoor dust collectors generating up to 5000 CFM and are available in 10HP or 15HP.  Equipped with a low RPM (1750 RPM) blower is designed to run much quieter than other high RPM units.  The 1-micron filter bags ensure optimum air filtration and can be manually shaken to for cleaning. The large 168 gallon self dumping collection bin comes on casters and can be conveniently lifted by a fork lift and tilted to dump t...

TALADRADORA 21 CABEZALES     PARTE: 2CK-HS21TIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions.  Has a robust fabricated steel construction with precision machined cast iron table.  The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM.  Each spindle is equipped with ...

TALADRADORA HORIZONTAL      PARTE: 2CK-BM301With its two spindle drilling head with adjustable drill centers from 0.71”~3.93” centers (18~100mm), you can conveniently drill dowel hoes with ease. The drilling assembly and table are made from cast iron for maximum rigidity and durability. The unit is mounted to a fabricated steel base for optimal functionality. The drilling cycle is controlled by a pneumatic cylinder and is actuated by a foot pedal for operator convenience. The drilling spe...

TALADRADORA 32 mm, 21 CABEZALES    PARTE: 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers.  The spring-loaded index pin allows for accurate and convenient continuous line drilling operations.  The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup.  The complete back fence can be adjusted for various measurements from the edge of the panel to the holes.  The precisio...

CIERRA CINTA 37" 2 EN 1     PARTE:2CK-HB950AIs a heavy duty bandsaw that is built to last. With its industrial cast iron wheel and table assembly it can handle any job.  What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size.  The saw wheels are driven by a powerful 10HP motor allowing you to make your cuts with ease.  With a large cutting height capacity under the guide of up to 22” it can also b...

CIERRA CINTA 24" 2 EN 1    PARTE: 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job.  What makes it unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size.  The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease.  This bandsaw delivers high accuracy for maximum production along with a simple design that assure...

CIERRA CINTA 24"      PARTE: 2CK-HB600RIncorporates a robust design with economical price point.  With its industrial cast iron wheels and table assembly it can handle any job.  With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements.  The upper and lower blade guides provide maximum stability no matter the blade you are cutting with.  This bandsaw delivers high accuracy for maximum production along with a simple desig...

CIERRA CINTA 20"    2CK-HB500RIncorporates a robust design with economical price point.  With its industrial cast iron wheels and table assembly it can handle any job.  With its powerful 3HP motor and capacity to run from a ¼” to 1 ¼” blade it can hand a wide range of cutting requirements.  The upper and lower blade guides provide maximum stability no matter the blade you are cutting with.  This bandsaw delivers high accuracy for maximum production along with a simple design that ass...

PART: 12576-E – VERTICAL PANEL SAW - HOLZHER 1265 SUPER CUTUSED – GOOD CONDITIONSCapacity: 75″ x 169″ Depth of Cut: 2″ Max. Blade Size: 8-5/8″(220mm) Main motor 4 HP 230 volts three phase Depth of cut 2” max Scoring unit with insert knives Saw head rotates 90 degrees for rip or cross cutting Automatic shifting back grid Two gauging bars with flip stop for midway fence Bottom rollers with manual control for easy movement of larger panels Approx...

PARTE: 12586 - ASERRADERO PORTATIL – WOOD-MIZER - LT15 TRAILERUSADO - MUY BIENAS CONDICIONES

PARTE: 12585 - CENTRO DE TRABAJO CNC – BIESSE ROVER 15USADO - MUY BUENAS CONDICIONESSpecifications:Working field for boring & routing: "X" Axis 86.5" (2,200 mm), "Y" axis 35.3" (898 mm) for boring & 37.4" (950 mm) for routing, max. panel thickness 2.5" (65 mm). Positioning speed:"X" axis at 246 FPM (75 MPM), "Y" axis 147 FPM (45 MPM), "Z" axis 49 FPM (15 MPM); "X" axis moves on high precision prismatic guides and ground helical rack; "Y" & "Z" axis via hardened ground ball screw. Work Table:...

PART: 12584-E – BORING MACHINE - RITTER R246USED – VERY GOOD CONDITION(2) Bottom vertical drill heads, each with (23) gear driven spindles on 32 mm centers (24 RH and 22 LH rotation), (2) 3 HP motors, 3,450 RPM spindle speed. Row & boring head spacing adjustable from 5" - 24" with mechanical digital readout, pneumatic cylinder drill head advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth control. Equipped with: (4) Overhead adjustable pneumatic holddowns on each head, 72" l...

PARTE: 12584 - TALADRO MULTIPLE – RITTER R246USADO - MUY BUENAS CONDICIONES(2) Bottom vertical drill heads, each with (23) gear driven spindles on 32 mm centers (24 RH and 22 LH rotation), (2) 3 HP motors, 3,450 RPM spindle speed. Row & boring head spacing adjustable from 5" - 24" with mechanical digital readout, pneumatic cylinder drill head advance, 0" - 1-1/2" adjustable stroke and 3-position turret depth control. Equipped with: (4) Overhead adjustable pneumatic holddowns on each head, 72...