Identificador: 2944
Abierta
Descripción
PARTE: 12709 - AFILADORA DE SIERRAS CINTAS - PARA ASERRADERO WOODMIZER
USADO - BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
MOLDURADORA 4 CABEZALES
PARTE # 32QD-MB4013GH - MOLDURADORA 4 CABEZALES - 20-130 MM ANCHOPARTE # 32QD-MB4016GH - MOLDURADORA 4 CABEZALES - 20-160 MM ANCHOPARTE # 32QD-MB4018GH - MOLDURADORA 4 CABEZALES - 20-180 MM ANCHOPARTE # 32QD-MB4023GH - MOLDURADORA 4 CABEZALES - 20-230 MM ANCHOFEATURESModel32QD-MB4013GH32QD-MB4016GH32QD-MB4018GH32QD-MB4023GHPlaning width20-130mm20-160mm20-180mm20-230mmPlaning thickness10-100mm10-100mm10-100mm10-100mmFeeding speed10-30m/min10-30m/min10-30m/min10-30m/minSpindle speed6000rpm6000rpm6...
AMXmachinery
ENCHAPADORA - CEHISA - PRO 8
PARTE: 12262 - ENCHAPADORA - CEHISA -
PRO 8
USADA - MUY BUENAS CONDICIONES
220V, 3 FASES, 60 HZ
TOTAL HP 7.58
SINGLE LARGEST HP 5.58
TOTAL AMPS 17.2
GLUE TANK: M-5
STATIONS:
- END TRIMMING
- TRIMMING
- POLISHING
AMXmachinery
SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
PARTE:
12371 - SISTEMA FINGER JOINT - 2 TROMPOS - 1 ENSAMBLADORA - MARCA HPC
USADO
- MUY BUENAS CONDICIONES
Make HPC
Year 1997
Phase 3 PHASE
Voltage 220 VOLT
Estimated Dimensions
Foot print of line 52' x 15'
Estimated Weight 10,000
Lbs (approx)
DESCRIPTION:
HPC Double Sided
Automatic finger joint line
Station 1 squares one
end and cuts initial finger joint
Station 2 squares the
other end, cuts finger joint, and applies glue.
Station 3 assembles an...
AMXmachinery
ESPIGADORA 1 LADO - FINGER JOINT
PARTE: 2TA-SET-60 - ESPIGADORA 1 LADO - FINGER
JOINTFeatures:It performs cut off, burrs trimming, and moulding
functions.Two 4" D x 5" L max. tenon cutters, cope spindle
accepts general shaper cutter. Suited for cutting tenons, finger joints for
window or doorframe and general joint-tenon.Hand, manual operated clamping and feeding of stock.First the trim saw to cut off the end of stock evenly.Then two moulding, tenon spindles are mounted at the rear
of saw enable machine performs edge moul...