Identificador: 2944
Abierta
ID de articulo : # 2944 se ha agregado a su lista de deseos.
Descripción
PARTE: 12709 - AFILADORA DE SIERRAS CINTAS - PARA ASERRADERO WOODMIZER
USADO - BUENAS CONDICIONES
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12568 - REASERRADORA HORIZONTAL - 2 BANDA - 6” ANCHO X 6” ALTO - BAKER
PARTE:
12568 - REASERRADORA
HORIZONTAL - 2 BANDA - 6” ANCHO X 6” ALTO - BAKER
Usada - Buenas
condiciones
460V | 3 Phase | 22’ in length | 2 20HP saw
motors | Extra parts including 5-6 bands
AMXmachinery
PARTE: 12474 - PINCH ROLLER - EVANS
PARTE: 12474 - PINCH
ROLLER - EVANS
USADA - BUENAS CONDICIONES
Safety Gates on In-Feed and Out-Feed
Solid Top and Bottom Rollers
Feed Rate: 50’ FPM
Maximum Width: 62”
Maximum Thickness: 2”
Thickness adjustable by spacers
Work Height: 30-1/2”
Drive Motor: 1/2 HP
Electrical: 120 V, 1 PH,
60 Hz
Air Requirement: 100 PSI
AMXmachinery
TORNO COPIADOR – NAVAJA TRASERA – LOBO
PARTE # 11623 – TORNO COPIADOR – NAVAJA TRASERA – LOBO En buenas condiciones de opracionProduccion 4-7 piezas por minutoMotor 7.5 HP, 220/440V, 3 fases, 60 cyLOBO CP-168A Hydraulic Copy Lathe with hopper feed with automatic chucking, square or round stock can be hopper feed.This unit is designed to produce (4 - 7) pieces a minute.Equipped with 7.5 HP Spindle motor, 1,800 - 3,200 RPM spindle speed adjustable by pulley change and 3 HP hydraulic motor.Features:Designed for the fast, effici...
AMXmachinery
TRISCADORA 10-60 MM AUTOMATICA
PART # 4VF-SV80ATV - TRISCADORA PARA SIERRA CINTAS 10 -60 MM - AUTOMATICANueva con garantiaAutomatic work cycle. Choice of type of setting: left/right or left/right/straight. Adjustment of the feed pitch, of the setting height and of the tooth bending degree. High-yield in very little workspace. Complete with base and with rod and roller to support saw blades.Bandsaw Thickness [min-max]: 0,5 – 1,2 mmBandsaw Width [min-max]: 10 – 60 mmSetting Pitch [min-max]: 5 – 35 mmSetting Speed [d...