ID: 2529
Open
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
ARMADORA DE CAJONES PARTE: 2CK-JEN60
Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.
- High production capacity of up to 220 drawers machined per hour.
- 57mm (2 ¼”) wide cutter head allows you to machine notches for a wide range of undermount drawer slides without needing to change heads or machine the component twice.
- Self-indexing drill unit for left or right drawer notching.
- Convenient foot pedal operation lets operator efficiently load and unload drawers for higher output.
- Pneumatic cutter & drill stroke by foot pedal operation.
- Cutter stroke and drill speed are adjustable for optimum finish results
- Drill will automatically position for both left and right drawer notches by activating a switch in the fence
- Machine will not cycle unless a drawer is up against the switch for safe operation
- Insert knife cutterhead with solid carbide inserts for optimum finish results and long tool life
- 2 ¼” (57mm) wide cutter allows for a wide range of undermount slides
- Comes with insert cutterhead with inserts and ¼” (6.3mm) solid carbide drill bit.
- Capable of notching up to 220 drawer boxes (both left and right) per hour.
Main cutter motor | 3 HP (230/3/60 or 460/3/60) | 2HP (230/1/60) | |
Notch dimensions | 2 ¼” (57mm) x 0.5” high | |
Cutterhead diameter | 10″ | |
Drill diameter | ¼” | |
Table size | 49″ x 22″ | |
Table height from floor | 32″ | |
Dust port | 2 x 4″ (1,340 CFM requirement) | |
Compressed air required | 90 – 100 PSI | |
Machine dimensions | 48” x 37 ¾” x 39 ¾” | |
Machine weight | 506 lbs. | |
Shipping dimensions | 53″ x 42″ x 44″ | |
Shipping weight | 612 lbs. | |
Electrical requirements | 230/3/60 = 9 amps | 230/1/60 = 10 amps 575/3/60 = 3.9 amps |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
AMXmachinery1
ABRAZADERA ARMADORA DE CAJONES
ABRAZADERA ARMADORA DE CAJONES 2CK-DWM-36Offers the rugged construction and ease of set-up of high production machines at a fraction of the price. Quickly clamp your drawer boxes precisely and square ever time.Quick setting drawer box clampStrong machine structure ensures square drawer boxesErgonomic design for convenient loading and unloadingCapable of clamping a wide range of drawer types: dovetail, dowel, tongue & groove, and dadoFast changeover between various drawer widths...
-500x500.png)
AMXmachinery1
MAQUINA DE COPEADO
PARTE: 2PI-CMJ-HSK - MAQUINA DE COPEADOIs a machine designed for chip free coping or tenoning of either square or profiled parts without the need for a back-up piece or chip breaker. Two independent spindles with the tool changer is a great fit for medium to large shops that need to quick-change between multiple profiles per day.No backer board or chip breakers requiredTear out free parts every timeAccurate spindle adjustment for tool alignmentPart stays fixed while the carriage movesDual Air-L...
-500x500.png)
AMXmachinery1
TORNO 32'' X 160'' 15 HP
TORNO 32'' X 160'' 15 HP PARTE: 2GM-GML-32160Heavy Duty Precision Gap Bed Lathe 32” x 160” 4-1/8” bore, 15HP Motor.ISO 9001 certifiedLarge spindle bore 4-1/8”4-way rapid traverse on Longitudinal and cross waysAll dual inch/metric dials.Solid cast iron machine baseHeavy Duty main motor 15 HP12 spindle speeds from 25-1,600 rpm54 kinds of inch threads and metric threadsThreading and feeding rate change by leversSpindle is balanced, hardened and precision grou...
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS - PEGAMENTO CALIENTE
PARTE: 2SS- EZ 72GP - ENCHAPADORA DE CANTOS - PEGAMENTO CALIENTEThe Glue Pot Edgebander applies glue to your panel, before edgebanding it and trimming it at up to 24 feet per minute. Engineered with a temperature controlled Glue Pot, prevents glue from overheating or splattering. The Edgebander is the ideal solution for smaller woodworking shops currently edgebanding inefficiently or doing it by hand. Two industrial routers and knives provide trimming and minimizes the need to sand or file edges...