Identificador: 1831
Abierta
.jpg)
.jpg)
Descripción
PARTE: 2TA-WG-4150 - ASTILLADORA - 41 PULGADAS
Features:
- A specially designed, powerful crusher for different materials such as wood, plastic, rubber, corn cobs, etc.
- Excellent wearing ability and impact-resistant for time & labor saving.
- Large busting capacity and easy feeding system.
- The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usage.
- Cutter head angle cutting design allows aggressive cutting rates & high speed shredding of waste.
- Movable screen for changing the size of chips and easy to clean-up.
- Energy efficient & quiet running industrial motor.
|
SPECIFICATIONS |
WG-2630 |
WG-4150 |
|
Entrance Capacity (L x W) |
26" x 12" |
41" x 12" |
|
Rotary Cutter |
6 sets |
12 sets |
|
Stationary Cutter |
4 sets |
|
|
Busting Capacity at 1/2" Chips |
1300 ~ 2600 (LBS/ Hour) |
1300 ~ 4000 (LBS/ Hour) |
|
Finish Chip Size |
3/4" (or other size) |
|
|
Main Motor |
30 HP |
50 HP |
|
Machine Sizes (L x W x H) |
82" x 52" x 79" |
90" x 70" x 98" |
|
N.W. |
3800 LBS |
6600 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA MULTIPLE - 1 SIERRA - 14 PULGADAS
PARTE: 2CK-SRS330Is a single-blade ripsaw is geared towards the shop looking to increase efficiency in their ripping operations but cannot justify a multi-blade ripsaw. With its precision cast iron chain and track assembly, and extended pressure section, the SRS330 can produce a glue joint finish ready for panel glue-up right out of the saw.Produces a guaranteed glue joint finish to 13′, which eliminates the need to joint the material after rippingPrecision straight line feeding for parallel...
-500x500.png)
AMXmachinery1
LIJADORA DE CANTOS
PARTE: 2LA-360 - LIJADORA DE CANTOSThe key to successful profile sanding is a combination of machine versatility, use of the correct abrasive medium, plus a little patience and understanding. The results are a remarkable increase in consistency, quality, and productivity.wheel tilts forward or backwardremovable fencequickly make fine adjustments
-500x500.png)
AMXmachinery1
INSERTADORA DE PERNOS
PARTE: 2PI-H49 - INSERTADORA DE PERNOSIs a horizontal point to point bore and dowel insertion machining center.It is designed to CNC position the spindle, bore a hole, then CNC position the inserter, inject glue or water (for pre-glued dowels), and fire the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and point to points by shifting boring and doweling
-500x500.png)
AMXmachinery1
PRENSA CNC 33 TONELADAS 5'
PRENSA CNC 33 TONELADAS 5' PARTE: 2GM-HPB-3305CNCIs a 33 ton press brake with two axis Estun Control. This is a Taiwain quality machine, designed in the USA. With it's rugged steel framework, quality hydraulic and electronic components, makes this press brake a great addition to any shop.ISO 9001 certifiedMeet OSHA and CE safety standardEasy-to-use programmable Estun E21 control Easy programming, stores 40 programsEstun E21 control keep a pice count for...