Identificador: 1700
Abierta
ID de articulo : # 1700 se ha agregado a su lista de deseos.
Descripción
PARTE: 2CK-JF330 - AFILADORA DE CUCHILLAS PARA MOLDURADORA
Was designed to ensure the operator can produce an optimum knife finish, while producing precisely accurate profiles. The powerful 3HP grinding motor makes knife grinding a breeze. The VFD allows the operator to dial in the optimum grinding speed no matter what type of knife steel they are grinding. Using an axial constant setup, tools can be transferred to the moulder quickly for precise and fast changeovers. The cutterhead is mounted to a sliding worktable which runs on high precision Schneeberger linear bearings. All these special features make the JF330 profile grinder the ideal solution for the small to large size moulding shop.
- Powerful 3 HP grinding motor, allowing deep aggressive grinding when required.
- Axial constant set up, allowing the ground tools to be easily transferred to the moulder for quick changeover
- Stainless steel splash guards, coolant tank for long rust-free life
- Easy to access adjustments and controls
- 3 HP grinding motor
- VFD to allow RPM to be varied for different wheels, and diameters
- Schneeberger linear bearings for effortless and smooth worktable movement
- Axial constant set up
- Quick change side angle adjustments
- Quick change grinding wheel hubs
Features: (Over 20 special modifications exclusive)
· 3HP Grinding Motor - hence heavy grinding possible
· VFD variable frequency drive with digital speed readout to wheel
· Schneeberger precision lineal bearings for easiest – smooth table movement
· Over the wheel precision dresser assembly with straight and radial diamond dresser - mounted above wheel for easy access
· Axial constant setup and template position
· Quick side angle positive positions
· 90 degree positive grinding wheel lock
· In/out table lock for straight knife grinding (template not required)
· Special 3 nozzle cooling system – above & below the grind hence faster grinding possible
· Stainless steel splash guards throughout and stainless coolant tank unit
· Quick change precision wheel adaptor hub
Standard Equipment
· Vari-speed grinding wheel – 1500 to 4200 RPM with VFD
· Quick change removable grinding wheel adaptor – 140 mm dia
· 6-position stylus turret (for profile grind guiding) for quick change
· 5° / 10° / 15° side clearance - quick setting
· 1 cutterhead arbor - specify diameter with 6 spacers
· HD bright work light
· Electrics & controls are to CSA / UL standards and are 230/460/3/60 as desired.
· 1 cutterhead arbor – please - specify diameter with 6 spacers
· 2.6 U.S. Gal (10 litres) coolant concentrate included
· Tool box included with lots of miscellaneous tooling
· 225mm x 5mm wide x 60mm bore excellent profile grinding wheel
|
SPECIFICATIONS
|
2CK-JF330
|
2CK-JF330A
|
|
Max. length of straight grind |
10” |
12” (14”, 16”, 18” optional) |
|
Max. length of profile grind |
10” |
12” (14”, 16”, 18” optional) |
|
Max. diameter of swing |
10” |
12” |
|
Max. depth of profile @ 140 mm hub |
1.6” |
|
|
Max. depth of profile @ 110 mm hub |
2” |
|
|
Grinding wheel HD motor |
3 HP |
|
|
Grinding wheel size |
225 mm dia. x 60 mm bore |
|
|
Footprint |
41” x 44” x 59” |
|
|
Net weight |
1,750 lbs |
1,850 lbs |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
LIJADORA DE BANDA ANCHA - MESA FIJA - 1 A 4 BANDAS
PARTE: 2CK-SUIncorporates a fixed table along with upper moving sanding units. This makes it ideal for in-line sanding or for use with conveyors as they do not need to be adjusted when changing material thickness. The digital thickness control will program the sanding units in accurately and precisely each time. The SU series is available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, combination sanding units (...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 5' X 12GA
DOBLADORA DE METAL 5' X 12GA PARTE: 2GM-0512EThis machine has a 3HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model is po...
AMXmachinery1
TORNO 20'' x 80''
TORNO 20'' x 80'' PARTE: 2GM-GML-2080Bed Gap Metal Lathe with a big spindle bore 3-1/8". Precise, robust, and fully equipped with a 29 swing in gap. Whether you're in a machine shop or looking to replace your old workhorse in your home garage, this metal lathe is for you. It comes standard with a fully assembled metal stand with two cabinets on each side to keep your tooling and accessories stored.ISO 9001 certified1-Year Parts Only WarrantyLarge spindle bore ...
AMXmachinery1
SIERRA DE BANCO - 14 PULGADAS
PARTE: 2CK-TA12Is for serious woodworkers and production shops that require an industrial strength and powerful table saw. The large precision-ground & polished cast-iron table and cast-iron saw unit ensure vibration free cutting with optimum cut quality. The quick setting T-square rip fence is equipped with dual inch & metric scales for precise rip cutting. The blade guard is mounted to a splitter with anti-kickback pawls for safe operation. Comes standard with both standard and dado arbors...