ID: 14
Open
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Description
PARTE: 2WA-CR70 – ASTILLADORA – MOTOR GASOLINA 38 HP, CAPACIDAD 7” DIAMETRO
7" x 12" Slab Style Opening
Auto Engage Fluid Coupler
Dual Active Rollers
Intellifeed
Kohler Gas Engine
Rotor Disc
Angled Rotor
Ledger Adjustment
Rapid Recovery Auto Reverse
Easy Start Tension Relief
Safety / Control Bar
360° Swivel Exit Chute
Easily Accessible Rotor Hood
Rotor Lockout Safety Lever
Double Banded V-Belts
Highway Tires
Electric Brakes
Torflex Suspension Axles
Signal Lights
Lockable Fuel / Storage Compartment
Enclosed Fuel Caps
DRIVE SYSTEM: | Double Banded Belt with Auto Engage Fluid Coupling | ENGINE: | 999 cc Kohler CH980 Engine |
CHIPPER CAPACITY: | 7" Diameter (Max. 10" Slab) | CHIPPER HOUSING OPENING: | 7" x 12" (Slab Style) |
ROTOR SIZE: | 28" Diameter x 0.75" Thick | NUMBER OF ROTOR KNIVES: | 4 Segmented |
KNIFE TYPE: | Hardened Tool Steel | ROTOR WEIGHT: | 190 lbs |
DIMENSIONS LXWXH: | 160" x 65.5" x 98.65" (Open) | HOPPER OPENING: | 25" x 35" |
DISCHARGE HOOD ROTATION: | 360 degrees | DISCHARGE HOOD HEIGHT: | 98.65" |
ROTOR RPM: | 1375 (Rotor) @ 3600 RPM (Engine) | WEIGHT: | 2750 lbs approx. |
TIRE SIZE: | ST205-75R14 |
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PARTE: 12530 - GUILLOTINA DE CHAPA - DOBLE NAVAJA - 4000 MM - EMME ELLE
PARTE: 12530 - GUILLOTINA DE CHAPA
- DOBLE NAVAJA - 4000 MM - EMME ELLE
Usada - Muy buenas
condiciones
Modelo: T.O.2.4000
2 cuchillas,
doble corte
Largo máximo de
trabajo 4000mm
Hidráulica
Panel de control
frontal EC9001
Año 2002
Normas CE
AMXmachinery
LIJADORA DE BASTONES - 1 LIJA
PARTE: 2SW-FS-80B - LIJADORA DE BASTONES
- 1 LIJA
NUEVA CON GARANTIASpecificationsSanding
belt drive motor: 3HPDust
suction motor: 1/2HPSanding
belt size: 5" X 73”Applicable
rod diameter: Ø5-Ø80mmFeed
speed (Variable): 1-20m/mmSanding
Belt Linear speed: 900m/mmNet
weight: 250kgsGross
weight: 320kgsMachine
Dimensions (L*W*H): 750*100*1350mmPacking
Dimensions (L*W*H): 880*850*1520mm
Design
and specifications are subject to change witho...
AMXmachinery
RELOJ RECTO - GRABADO
PARTE: P-BASE-520-G - RELOJ RECTO - CON RELOJ 3" - MADERA SOLIDA - COLOR CAOBAMadera solida de pinoReloj de 3" diametro (bateria no incluida) Medidas: 6" ancho x 8.5" alto x 2" espesor
AMXmachinery
PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR
PARTE # 11913 - PRENSA DE TABLEROS – 20 SECCIONES – TAYLOR8.5 ft. wide with approximately 6 clamps per sectionClamps are standard 2-1/2” high jaws by 32” openingIncludes air tightener and panel flattenerMachine was new in 1983Good conditions