Identificador: 14
Abierta
ID de articulo : # 267 se ha agregado a su lista de deseos.
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2WA-CR70 – ASTILLADORA – MOTOR GASOLINA 38 HP, CAPACIDAD 7” DIAMETRO
7" x 12" Slab Style Opening
Auto Engage Fluid Coupler
Dual Active Rollers
Intellifeed
Kohler Gas Engine
Rotor Disc
Angled Rotor
Ledger Adjustment
Rapid Recovery Auto Reverse
Easy Start Tension Relief
Safety / Control Bar
360° Swivel Exit Chute
Easily Accessible Rotor Hood
Rotor Lockout Safety Lever
Double Banded V-Belts
Highway Tires
Electric Brakes
Torflex Suspension Axles
Signal Lights
Lockable Fuel / Storage Compartment
Enclosed Fuel Caps
DRIVE SYSTEM: | Double Banded Belt with Auto Engage Fluid Coupling | ENGINE: | 999 cc Kohler CH980 Engine |
CHIPPER CAPACITY: | 7" Diameter (Max. 10" Slab) | CHIPPER HOUSING OPENING: | 7" x 12" (Slab Style) |
ROTOR SIZE: | 28" Diameter x 0.75" Thick | NUMBER OF ROTOR KNIVES: | 4 Segmented |
KNIFE TYPE: | Hardened Tool Steel | ROTOR WEIGHT: | 190 lbs |
DIMENSIONS LXWXH: | 160" x 65.5" x 98.65" (Open) | HOPPER OPENING: | 25" x 35" |
DISCHARGE HOOD ROTATION: | 360 degrees | DISCHARGE HOOD HEIGHT: | 98.65" |
ROTOR RPM: | 1375 (Rotor) @ 3600 RPM (Engine) | WEIGHT: | 2750 lbs approx. |
TIRE SIZE: | ST205-75R14 |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO - MOTOR 1/3 HP
PARTE: AMX-10124 - EXTRACTOR DE TUBO - ASPAS 14” DIAMETRO
- MOTOR 1/3 HP
USADO - BUENAS CONDICIONES
MOTOR 1/3 HP, 280/440V, 3 FASES
MEDIDAS: 14” DIAMETRO INTERIOR X 16”
DIAMETRO EXTERIOR X 14” FONDO
4,500.00 MXN
AMXmachinery
CEPILLO 2 LADOS CABEZALES HELICOIDALES INSERTOS NORTHTECH
PARTE: 12074 – CEPILLO 2 LADOS – CABEZALES HELICOIDALES INSERTOS - 24" ANCHO - NORTHTECHUSADO - EN MUY BUENAS CONDICIONESUSO RUDOCABEZAL SUPERIOR 30 HPCABEZAL INFERIOR 25 HPMOTOR ALIMENTACION: 5 HPCABEZALES 5000 RPMVELOCIDAD VARIABLE 25 - 95 FT/MIN ESPESOR DE TRABAJO 10 - 155mm (3/8” - 6-1/2”)15” min working length - 24” maximum widthMANUFACTURA 2005FEATURES:Carpet feeding spike system with 1100 spikesMechanical variable speedDigital control panel with 3 amp metersChrome bed ...
AMXmachinery
FINGER JOINT SEMIAUTOMATICO
PARTE # 32M-FJS-005 – SISTEMA FINGER JOINT – SEMIAUTOMATICOEscalable a AutomaticoIncluye:Trompo- Motor Finger 20 HP- Motor Escuadra 5 HP- Motor Mesa 2 HP- Motor Bomba Hidraulica 1/2 HP- Velocidad 3-4 veces/minEnsambladora- Area de trabajo 5000mm largo x 150mm ancho x 75mm alto- Motor Cortador 5 HP- Motor Alimentador 1/2 HP- Motor Bomba Hidraulica 5 HP- Capacidad/min 3-4 piezas/min
AMXmachinery
PARTE: 3HP-EMA-250 – CABECEADORA - CONTINUA - PARA TABLAS Y PISOS – 40-250 MM ANCHO
PARTE: 3HP-EMA-250 – CABECEADORA - CONTINUA - PARA
TABLAS Y PISOS – 40-250 MM ANCHO
ESCOPLO Y ESPIGANuevo con garantíaSpecification:1.Max. / Min. Width: 250mm /
40mm2.Max. / Min. Thickness: 10mm
/ 35mm3.Min. Board Length: 270 mm4.Max. Board Length: Unlimited5.Max. Board Weight: 15kgs6.Cutterhead Motors: 5-1/2HP
x2 (Optional: 7-1/2HP x2 or 10HP x2)7.Feeding Pressure Roller
Motor: 1HP W/1HP Inverter8.Infeed Conveyor Table Motor:
1/2HP (Optional: Variable Feed 1HP Inverter)9.Cutterhea...