Identificador: 1261
Abierta
BASTONERA – MOTOR 20 HP – CAPACIDAD 1-1/4” – 3-1/4” DIAMETRO – HAWKER 350
AMXmachinery
Descripción
PARTE: 12226 – BASTONERA – MOTOR 20 HP – CAPACIDAD 1-1/4” – 3-1/4” DIAMETRO – HAWKER 350
USADA – REVISADA Y CHECADA
(4) knife
Adjustable all steel cutter-head from 1-1/4″ to 3-1/4″ dia.
18″ min. length
Right hand stock feed
Motor: 20HP
Feed Motor: 2HP
Variable feed speed
For operation on 230/460V, 3PH
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
DOBRADORA DE TUBO HIDRAULICA
PARTE # 2MA-HTB-2 - DOBRADORA DE TUBO HIDRAULICANueva con garantia- Bends up to 2"schedule 40 pipe (1.54")- Dies available in 120 and 240 degrees- Dies and all Pins are heat treated- Bronze bushings at Pivot Points- Capabilities greater than benders costing 3 times as much- High quality components and cosntructionTube Dies: 3/4", 7/8", 1", 1-1/8", 1-1/4", 1-1/2", 1-3/4", 1-5/8", 2" for 120 degrees for radius 120 and 240 degreesPipe Dies: 3/4", 1", 1-1/4", 1-1/2" for Radius 120 and 240 degreesWei...
AMXmachinery
REASERRADORA DE PRECISION - CORTE DELGADO - REMAX
PARTE: 2OG-REMAX - REASERRADORA DE
PRECISION - CORTE DELGADO - REMAX
NUEVA CON GARANTIAReMaxUnlike other resaws,
the REMAX 500 is built from solid cast iron and incorporates a durable and
effective guiding system. The thin-kerf saw blades are tensioned hydraulically
enabling the machine to produce smooth, glueable surfaces with superior
tolerances.The REMAX 500’s modular
construction gives your company room to grow. A single, stand alone unit can be
purchased initially; additional un...
AMXmachinery
TROMPO CON ALIMENTADOR - MOTOR 7.5 HP - LARICK 390
PARTE: 12327 - TROMPO CON ALIMENTADOR - MOTOR 7.5 HP - LARICK
390
USADO - EXCELENTES CONDICIONES
230/460, 3 PHASE
AMXmachinery
PARTE: AMX-10067 – LIJADORA DE BANDA – ROCKWELL-INVICTA
PARTE:
AMX-10067 – LIJADORA DE BANDA – ROCKWELL-INVICTA
USADA – MUY BUENAS CONDICIONES
MOTOR
3 HP, 220V, 3 FASESINCLUYE EXTRACTOR DE AIRE EN LA PARTE TRASERA DE LAS BANDASMEDIDAS DE LOS 2 VOLANTES: 12" DIAMETRO X 6" ANCHOMEDIDA LIJA INSTALADA: 5" ANCHO X 6.90M LARGO
MEDIDA MESA DE TRABAJO: 260 CM LARGO X 80 CM ANCHO
MEDIDA TOTAL MAQUINA: 375 CM LARGO X 155 CM ANCHO X
135 CM ALTOVIDEO: https://vimeo.com/1060525690