Identificador: 1733
Abierta
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
PARTE: 2CK-P24HV
- Spiral Insert Knife Cutterhead with replaceable carbide insert knives for long life and smooth cutting action (132 inserts, 14mmx14mmx2mm)
- Sectional chip breakers
- Serrated sectional infeed roll conforms to material which is not yet flat
- Anti-kickback fingers for safe operation
KEY ADVANTAGES
- 2-feed speeds
- Double bed rolls which are conveniently adjusted from the front of the machine to assist with planing difficult to feed material
- Side handwheel with linear scale for table adjustment
- Polyurethane outfeed roll which will not mark your material after it has been planed
- Flip open top lid with limit switch for safe & convenient changing of the insert knives
|
Maximum planing width |
24″ |
|
Maximum planing thickness |
8″ |
|
Feed speeds (2) |
20 & 30 FPM |
|
Main motor |
7.5 HP |
|
Cutterhead diameter |
3-1/16″ |
|
Min. length |
8″ |
|
Table rise & fall |
Manual |
|
Dust port (1) |
6” |
|
Net weight |
950 lbs. |
|
Machine dimensions (LxWxH) |
48” x 36” x 50” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA - 1 LADO
PARTE: 2CK-ST152C - ESPIGADORA SENCILLA
- 1 LADO
NUEVO CON GARANTIAOffers superior tenoning results in a economical solution. The 12” trim saw unit is mounted in front of the tenon heads and enables stock to be cut to the desired length. The two horizontal spiral insert knife tenoning heads are capable of producing a tenon up to 6” long. The heads are accurately adjusted using mechanical digital readouts. The spiral insert heads produce an extremely smooth finish result. The tw...
-500x500.png)
AMXmachinery1
ESPIGADORA HAUNCHING
PARTE: 2PI-MTH - ESPIGADORA HAUNCHINGIs a multi-function, multi-axis Horizontal Machining Center designed to machine many of the components of Kitchen Cabinets all in one machine.Efficiency – haunch, mortise, and tenon all on one machineSpeed – increased cabinet door production
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA - 6"
PARTE: 2RI-R901 - LIJADORA DE BANDA - 6"Description:Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing applications makes this the industry’s most universal edge belt sander.Standard Features:Double Sided Ground Steel PlatenBias Tilting TablesFull Dust Hood with 4" End Openings for Dust CollectionPedestal BaseControls Accessible From Both SidesMagnetic ControlsEnd Sanding Kit with...
AMXmachinery1
ENCHAPADORA DE CANTOS
PARTE: 2MK-CBC.E - ENCHAPADORA DE CANTOS Is designed for convenience, portability, and efficiency. It has retractable legs for easy transportation. Works with edge banding tape width up to 3” and thickness 0.3mm -2mm. The built-in manual cutter provides a precise cut of the tape. With a digital temperature control panel, you can easily control the glue temperature and the glue pot capacity is 1.5 pounds (700 grams).A spiral bar raises the glue from the glue pot and flows back down, similar to...