Identificador: 1925
Abierta
Descripción
PARTE: - CEPILLO 2 CARAS - CAPACIDAD 15” - NORTHTECH
USADO - BUENAS CONDICIONES
Mfg: 2006
15" width capacity
6" height capacity
Helical heads
Top head 20HP
Bottom head 15HP
20-90 FPM
Motorized opening (1 HP)
460 volt 3 phase
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ASERRADERO HORIZONTAL – 1 BANDA – MOTOR 30 HP
PARTE: 3HP-HP-LOG – ASERRADERO HORIZONTAL
– 1 BANDA – MOTOR 30 HP
NUEVO CON GARANTIA
SCRAGG MILLVideo: https://vimeo.com/572381491
Specification:
1.Working
Capacity: 120-400mm (D)
2.Balde
Elevation Distance from Conveyor: 10-235mm
3.Saw
Wheel Motor: 30HP
4.Elevation
Motor:1/4HP
5.Saw
Blade Tension by Hyd. Compensation System
6.Conveyor
Length: 4500mm
7.Hydraulic
Motor: 3HP
8.Saw
Wheel Dimension: 34"(D) x 2"(Thickness)
9.
Saw Balde Size: 5310mm(...
AMXmachinery
LIJADORA DE BANDA ANCHA – 36” ANCHO – 1 BANDA – TIMESAVERS
PARTE: 12219 – LIJADORA DE BANDA ANCHA
– 36” ANCHO – 1 BANDA – TIMESAVERS
USADA – BUENAS CONDICIONES
0
to 8" thickness capacity, (manually adjusted via handwheel)
20
HP, 230/60/3 combination 4" diam. drum & platen sanding head
(60
- 65) durometer rubber covered contact drum
1
HP, 230/60/3 feed conveyor motor
(15
to 45 ft/min.) variable conveyor feed via variable speed pulley
24"
infeed & 8" outfeed conveyor, (4 jack screws for raise & lower)
Automatic
...
AMXmachinery
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6
PARTE: 12597 - TRITURADORA - BLOAPCO - MODELO 7-6USADO – BUENAS CONDICIONES - RECONSTRUIDOMax trim width 7.5"Shear Cutting ActionRotor Speed 500 to 3,600 rpm1 HP motorModel 7-6 provides cutting via one stationary bed knife and two rotating knives provides two cuts per revolution. The open-rotor design facilitates free passage of air and material. Shear-cut action for paper and tough, thin film and foil. Total weight is 135 pounds17"L x 13.25W x 22.5H
AMXmachinery
LIJADORA DE BANDA ANCHA – 3 LIJAS – 52” ANCHO – TIMESAVERS
PARTE: 12190 – LIJADORA DE BANDA ANCHA – 3 LIJAS
– 52” ANCHO – TIMESAVERS
USADA – BUENAS CONDICIONES – POCO USO
50 HP,
460/60/3, 12" diam. rubber contact drum with hold-down shoes
50 HP,
230/460/60/3 platen with hold-down shoes
40 HP,
230/460/60/3 platen with hold-down shoes
5 HP,
208-230/460/60/3 feed system motor with Poweflex VFD
Powered
up/down conveyor with digital ProScale readout
75"
abrasive belt length, electric eye tracking, & motor load meters...