ID: 2913
Open
Description
PARTE: 2CA- WP-1124 - CEPILLO 24” ANCHO – MOTOR 5 HP – CUCHILLAS RECTAS
Nuevo con garantía
Area de la mesa: 25" x 29¼
Cabezal: 3"
Velocidad cabezal: 5000 RPM
Numero de cuchillas: 3
Rodillos alimentacion: 3"
Rodillos mesa: 2-3/8"
Rango de velocidad de alimentacion: 24 FPM
Max. Depth of Cut: ¼"
Stock Thickness Range: 1/8" ~ 7-7/8"
Max. Width of Stock: 24"
Motor Power Required: 5 HP, 3 PH, 230 V
N.W.: 1000 LBS
G.W.: 1200 LBS
Payments & Returns
- Payment Methods
- Transferencia/Deposito Bancario
Post Message
Sign in to ask the seller a question.
AMXmachinery
SOLDADORA DE MADERA - ALTA FRECUENCIA
PARTE: 2TE-0001 – SOLDADORA DE MADERA – ALTA FRECUENCIANuevo con garantíaFeatures:Weight150 lbsDimensions66 × 43 × 44 cmSupply240 volt / 50hz (standard 13-amp 3-pin plug)Generator frequencyNominal 27.2 MhzCuring speed3 – 10 seconds per weldPenetration50mm effectiveOutput0.5 – 0.6 amps at 2400 volts (internal HT) on loadFinishHardwearing powder coated finishElectrical SafetyCabinet and fittings are fully earthed. Cutout switch isolates main power if rear access panel is removed. 10 amp...
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-913003 - LIJADORA DE 2 TAMBORES - 25” DE ANCHOSanding Capacity:Maximum Width (in): 25Minimum Length (in): 2-1/4, varies per applicationMaximum Thickness (in): 6Minimum Thickness (in): 1/32Dimensions HxWxD (in): 52 x 42 x 27Drum: 5 x 25 extruded aluminumDrum Speed: 1740 RPMDust Hood: Steel hood w/ two 4" vacuum ports, hinged at back, 1000 CFM recommendedBall bearings (1"): 4, sealed and permanently lubricatedConveyor Motor: 43 in.-lb. torque, direct drive D.C. motor, infinitely vari...
AMXmachinery
LIJADORA DE TAMBOR
PARTE # 2SM-72550 - LIJADORA DE 1 TAMBORES - 25”- 50” DE ANCHOSPECIFICATIONSSanding Capacity:Maximum Width (in): 50 (two passes)Minimum Length (in): 2-1/4Maximum Thickness (in): 4Minimum Thickness (in): 1/32Dimensions (in):46L x 27W x 53H (on stand)Drum:5 x 25 extruded aluminumDrum Speed:1740 RPMDust Hood:1- 4″ vacuum port, min. 600 CFM recommendedConveyor Motor:43 in.-lb. torque, direct drive D.C. motor, ranged variable 0-10 FPMDrive Motor (TEFC):1-3/4 HPPower Requirements110 V 20 ampShi...
AMXmachinery
RODILLOS NUEVOS O REPARADOS PARA ENGOMADORAS
PARTE: 2BB-0150 – RODILLOS NUEVOS O REPARADOS PARA ENGOMADORAS
PARTE: 2PR-0025 – RODILLOS NUEVOS O REPARADOS PARA ENGOMADORAS
NUEVOS CON
GARANTIA
Para engomadoras
Black Bross, etc.