Identificador: 3191
Abierta
.PNG)
Descripción
PARTE: 2EX-SXP-425 - CEPILLO 4 CARAS - 25" ANCHO
Details:
- 50 HP Top, 40HP Bottom
- 15 HP side Motor
- 6000 RPM Cutter heads
- Air Loaded Sectional feed roller
- Digital PLC Thickness Controller
- Long infeed and outfeed tables
- Moulder Style Side heads
- Carden Shaft drive System
- Segmented Roller Feed System
Specifications:
- Horsepower: 50/40/15/15HP
- Width: 25"
- Top Motor: 50 HP
- Bottom Motor: 40 HP
- Left Motor: 15 HP
- Right Motor: 15 HP
- Elevation Motor: 2 HP
- Feed Motor: 5 HP
- Standard Max Thickness 8"
- Max Available Thickness: 12"
- Min Length: 28"
- Cutterhead RPM: 6000
- Top Cutter Access: Super Slide
- Bottom Cutter Access: Super Slide
- Side Cutter Access: Moulder Style
- Side Spindle Movement: Manual Screw
- Infeed Table Length: 90"
- Outfeed Table Length: 72"
- Disc Brakes: Yes
- Feed System: 39 - 130 ft/min
- AMPS (220V/440V): 311A / 156A
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL Entry level with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...
-500x500.png)
AMXmachinery1
SIERRA DE PANELES 1600MM
PARTE: 3HO-MJ6116 - SIERRA DE PANELES 1600MMThe sliding table saw for longitudinal, transverse and angular cutting of panel materials (MDF, fibreboard, chipboard and glued panels) faced and laminated, as well as blanks made of solid wood, with preliminary trimming of the lower edge to prevent chipping. It is possible to cut blanks individually or in batches, as well as to tilt the saw unit up to 45° in the vertical plane.Table Guide Length*Width1600mm * 375mmMax. Cutting Height at 90° 80mmM...
AMXmachinery1
ALIMENTADOR - 7 RUEDAS - VELOCIDAD VARIABLE - PIEZAS CORTAS
PARTE: 2CK-DC70 - ALIMENTADOR - 7 RUEDAS - VELOCIDAD VARIABLE - PIEZAS CORTASFor woodworkers looking for the capability of feeding smaller parts that tend to wobble with standard 3 & 4-wheel power feeders. It is ideal for automatically feeding cabinet door parts, furniture parts, and more to a shaper.Ideal for feeding of short material7-rolls at 2.36” (60mm) which are closely coupled with a center to center distance of 2.43” (61.7mm)Universal stand allows the operator to change the feeder...
-500x500.png)
AMXmachinery1
CEPILLO 1 CARA - 26" ANCHO
PARTE: 2EX-XP-126T - CEPILLO 1 CARA - 26" ANCHOComes in 24″, 26″, 30″ & 40″ width. Is available with VECTOR Cutterhead, infeed roller, heavy duty internal drive system, and a PLC controller.Available with VECTOR, STEALTH, MACH or straight knife cutter heads 11-3/4” thickness capacityHigh Horsepowers: 20 HP & 15 HP6000 RPM cutterheadPowered top and bottom bed rollersMotorized table elevationDigital thickness controllerSolid cast-iron constructionTriple v-beltsSectional chipbreakers Ex...