Identificador: 3234
Abierta
ID de articulo : # 3234 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EX-DCY-1220 - COLECTOR DE POLVOS - 20 HP - CICLON
Features a powered unit with rotary airlock and multiple stand configurations to accommodate a variety of height and dumpster dimensions. This series requires no bagging because all waste dumps from the rotary air lock, and there is no need to power down the unit while cleaning up waste. Is a 3- phase outdoor cyclone dust collector equipped with 20 horsepower and 8800 CFM. Electronic controls must be protected from weather. Magnetic starter included.
|
|
|
15HP 3PH Outdoor Cyclone Dust Collector with Optional High Capacity Rotary Airlock
|
20HP Outdoor Cyclone Dust Collector |
|
|
Amps
|
62A @ 230V 31A @ 460V |
37A @ 230V 19A @ 460V |
49A @ 230V 25A @ 460V |
|
|
Cfm
|
10500 |
7600 |
8800 |
|
|
Chip dumping capacity
|
10 CFM |
10 CFM |
10 CFM |
|
|
Dimensions
|
25′1″ x 153.5″ x 98.5″ |
16′-3″ x 73.25″ x 73.25″ |
23′-11″ x 153.5″ x 98.5″ |
|
|
Drop size
|
8" x 12" |
8" x 12" |
8" X 12" |
|
|
Horsepower
|
25HP |
15HP |
20HP |
|
|
Inlet-size
|
18" |
14" |
16" |
|
|
Outlet size
|
20" |
16" |
18" |
|
|
Rotary airlock hp
|
1/4 HP |
1/4 HP |
1/4 HP |
|
|
Soft start
|
Yes |
Yes |
Yes |
|
|
Weight
|
2850 lbs |
2000 lbs |
2500 lbs |
|
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery1
DOUBLE END TENONER - 8 CABEZAS - 141” ANCHO
PARTE: 2CK-ECT SERIES - DOUBLE
END TENONER - 8 CABEZAS - 141” ANCHOThey are available with up to (8) spindles (4-per side) and come in widths from 51” to 141”. These double end tenoners are ideal for door, furniture, & window production and more. The ECT series can be customized for your specific needs with a wide range of processing units and features. The ECT are available as a stand-alone solution or can be purchased in a line for processing all four sides of a workpiece auto...
AMXmachinery1
TALADRO BASTIDOR - 1 BROCA
PARTE: 2SS-SPM301HD - TALADRO BASTIDOR - 1 BROCAPocket-hole joinery for high production woodworkers made easy with our Screw Pocket Machine. This machine allows for simultaneously drilling a pilot hole and machining a screw pocket in under a second.A two-in-one motion simultaneously drills a six degree pilot hole and machines a screw pocket in under a second on most wood species. Features a heavy-duty, direct drive continuous electric spindle motor, allowing for continuous pocketing prod...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA 4' x 10 Ga
CORTADORA DE METAL HIDRAULICA 4' x 10 Ga PARTE: 2GM-HS-0410MDTaiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke from 16-20 strokes per minute60” long squaring arm with inch / mm scaleSpring hold-downs High grade carbon/chrome alloy steel blades and hardened to 62 HRC, 2-edge indexable upper blade and 2-edge indexable bottom bladeFull length with full view finger ...
AMXmachinery1
FINGER JOINT - AUTOMATICO
PARTE: 2CK-FL12 - FINGER JOINT - AUTOMATICO Represents a fully automatic state-of-the-art finger jointing production line, meticulously engineered to transform short pieces of wood waste into valuable materials with an exceptional balance between performance and cost-efficiency. From the initial workpiece in-feed to the precise left and right shaping and ultimately the jointing process, every step is executed swiftly and accurately. The entire production line has been thoughtfully crafted fo...