Identificador: 2956
Abierta
ID de articulo : # 2956 se ha agregado a su lista de deseos.
Descripción
PARTE: 2PI-220 - LIJADORA DE CANTOS
features two counter-rotating spindles to be used with brush type sanding wheels. This allows parts to be sanded without noticeable rounding over on corners. The sanding technique is to sand the left corners on the right sander and the right corners on the left sander. This method has the brushes formed to the profile as they go over the corners.
- designed for flexible brushes
- 2 upper and lower sanding heads
- table moves up and down, allowing the user to sand certain parts, easily sanding without rounding edges
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX350MR - ENCHAPADORA DE CANTOS - 23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350MR - ENCHAPADORA DE CANTOS - 23 FPM - 0.4 - 3 MM - PREMILLEntry-level machine with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high-quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. A special feature of this machine is the dual purpose end trim system whic...
-500x500.png)
AMXmachinery1
CABEZAL DE CORTE PLANO
PARTE: 3CH-FCB - CABEZAL DE CORTE PLANOStraight bore that can be fits in general 4-side moulders/planers and shapers.Choice of steel or aluminum body.
AMXmachinery1
TROMPO AUTOMATICO - CON SISTEMA DE ALIMENTACION
PARTE: 2CK-DT-1128A
Range of cutter diameter
1” to 6” (changeable)
Table diameter
18”
Table speed
1.5 ~ 4.0 RPM (4 speeds)
Spindle diameter
30 mm
Spindle speed
9000 RPM
Cutter size
100 mm
Spindle height
4”
Follower roller diameter
100 mm x 1
Table drive moto...
-500x500.png)
AMXmachinery1
FRENO HIDRAULICO DE PLANO RECTO
FRENO HIDRAULICO DE PLANO RECTO PARTE: 2GM-HSB-1014Taiwan MachinesISO 9001 certifiedHydraulic adjustment for openingHydraulic power clamping for workpiece26” manual back gauge with handwheel1” manual beam adjustment ( front and back )Min. reverse bend is ¾” (20mm)Heavy welded all steel construction for maximum rigidityGermany Rexroth Hydraulic logic system centrally located and quietA wide guidebody ensures strong, stable, smooth & accurate movementComes wit...