Identificador: 1909
Abierta
.jpg)
Descripción
PARTE: 11763 - CEPILLO NEWMAN 500 - 4 CARAS
11 - CEPILLO NEWMAN 500 - 4 CARAS
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENCHAPADORA DE CANTOS
PARTE # 11895 – ENCHAPADORA DE CANTOS – BIESSE ERGHO 6EN BUENAS CONDICIONESOPERADA POR MEDIO DE PLC GRUPOS:RECTIFICADORENCOLADORRETESTADORRIBETEADORREDONDEADOR DE ESQUINASALISADOR DE CAMPORASCADOR DE PEGAMENTOABRILLANTADOR. CABINA DE PROTECCIONCAPACIDAD CHAPACINTA: DE .45 A 3 MM DE ESPESOR MARCA: ARTECH BIESSEMODELO: ERGHO 6AÑO: 2004MEDIDAS MAQUINA: ANCHO 6.40 M X FONDO 1.20 M X ALTO 1.43 MCONSUMO ELECTRICO: 220 VACFASES: 3 (TRIFASICO)KW: 15.9HZ: 60KW: 15.9HZ: 60VELOCIDAD DE SUCCION: 30M...
AMXmachinery
TROMPO COPIADOR 28" MESA ROTATIVA
PARTE: 2LO-CS-0028 - TROMPO COPIADOR 28" - MESA ROTATIVA - AUTOMATICOCaracteristicas: - All operation controls are concentrated in the control box, and the controls are well arranged on the control panel for easier touch up to operation.- Equipped with PC program control for easy maintance and durability usage.- The easy set up at any position, 2 variable speeds table turning makes it possible for the machine to be operated at any cutting speed up to maximum.- The variable cutting feed rate can...
AMXmachinery
PRENSA DE TABLEROS - 6 SECCIONES - TAYLOR
PARTE # 11988 - PRENSA DE TABLEROS - 6 SECCIONES - TAYLOR 8-1/2' Wide, 6 section(36) 40 in. opening clamps w/ 2-1/2 in. high jawPneumatic motor drive for rotationSwing style pneumatic clamp tightener and panel flattener
AMXmachinery
HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433 LITROS
PARTE:
2PA-SUPERDRAGON – HORNO PARA CERAMICA, VIDRIO, METALES - INDUSTRIAL - 433
LITROSNuevo con garantía
Max. Temperatura: 1287 grados centígrados
21,600 Watts, 90 Amps, 240V, 1
Fase
Medidas interiores: ancho 686 mm x largo 686 mm x 914 mmQuick to loadIf you fire ware that is similar in size from one firing to the
next, you can leave the shelves and posts stacked in the Dragon between
firings. Reach into the kiln to remove the ware and reload the kiln for the
next firing.Sin...