Identificador: 1747
Abierta
.jpg)
.jpg)
Descripción
PARTE: 2CK-UFO103B
Is ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.
- 5 HP generating 2863 CFM
- Base is mounted on casters so it can be moved around the shop to where it is needed
- Durable cotton filter bags
- Magnetic starter included
KEY ADVANTAGES
- 5HP Motor
- 2863 CFM
- 7” main inlet with removable outlet with (4) 4” ports
|
CFM |
2863 CFM |
|
Motor |
5 HP |
|
Main inlet diameter |
7″ |
|
Connector inlet diameter |
(4) 4″ |
|
Bag Volume |
20.97 cubic feet |
|
Static pressure of water |
10.55 inch |
|
Top bags (2) |
24″ x 42” |
|
Bottom bags (2) |
24″ x 42” |
|
Net weight |
253 lbs |
|
Noise Level |
85dB |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
CONECTOR EN Y
PARTE: 2EX-DA-SW0404 - CONECTOR EN YOffers wye branches for splitting a branch or trunk line into two separate branches with trunks available in 4 to 16 inch diameters and branches available in 3 to 10 inch diameters.
-500x500.png)
AMXmachinery1
TALADRO MULTIPLE - 21 CABEZALES
PARTE: 2CK-HS21T - TALADRO MULTIPLE - 21 CABEZALESIs a versatile construction drilling machine which is capable of line boring, end drilling, & construction drilling functions. Has a robust fabricated steel construction with precision machined cast iron table. The boring head is cycled pneumatically and runs on precision linear guide rails for smooth drilling cycles. A 2 ½ HP motor powers the boring head with 21 gear driven drill bits and operates at 2800 RPM. Each spindle is equipped wit...
AMXmachinery1
CENTRO DE MAQUINADO CNC - 5 AXIS - PARS
PARTE: 4NE-5AXISPARS - CENTRO DE MAQUINADO CNC - 5 AXIS - PARSWorking Area: Y:1350MM- X: 2100 MM two different table 1000+1000- Z: 1200 MM• Control Unit: TPA control unit• Y1/ Y2 Axis Motor: 1.5 kw Rack and Pinon• X Axis Motor: 1.5 kw Rack and Pinon• Z Axis Motor: 3 kw Ball Screw with break• Tool Changer: Magazine for 5 pieces• Reductor: Liming FE Series• Spindle Motor: HITECO TILT-J Bi-rotary 2 Axis head• Vacuum System: Backer Vacuum 250 M^3• Oiling System: ILC Self Lubricatio...
-500x500.png)
AMXmachinery1
ARMADORA DE CAJONES
PARTE: 2CK-JEN60 - ARMADORA DE CAJONES Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers m...