Identificador: 3152
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 12738 - COMPACTADORA HORIZONTAL DE CARTON
Automatic wire tier is missing on one side.
Machines operates in manual mode only, operator must remain in contact with switch while in operation
Tested and works as it should in manual mode wired, 480V
Machine will work as is, but must be manually tied, or run continuously without ties.
Unit will need evaluated and programmed to utilize PLC and monitor
Upgrades were utilized but look as though they were later abandoned. There is a PLC and Touch screen added that do not communicate.
We had a professional technician come out and evaluate machine, eliminate abandoned wiring and give an overall review of equipment.
The compactor tunnel is 13' x 30" (not compacted sides) 24" compacted sides x 36" tall
Bale size is approx. 24" w x 36" t x 48" l
Appears many hydraulics are newer. The pump appears newer, hoses, valves etc.
Tank measures 33" x 55" x17" (usable level) 24" topped off level Approx. 89 Gallon full capacity and 125 gallon total capacity
Ram cylinder is 8" bore x 44" stroke
Pump motor is Elektrim 50Hp 230/460V 113/56.5A
Top load chute measures 28-1/2" Square, flange outside measures 33" Square
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
SIERRA TRIMMER - 60", 98" & 120" LARGO
PARTE: 2CK-CK-2200 - SIERRA TRIMMER - 60", 98" & 120" LARGOThrough feed double cut off saw with loader for linking with 4 sided moulders leads to a reduction in man power requirementsEasy loading using hopper ensures maximum throughput capacity reachedSystem will cut boards to desired length, and automatically feed the cut boards continuously through the moulder butt to buttSystem comes complete with automatic waste conveyor for easy removal of offcuts to disposal area.Also available in differ...
AMXmachinery1
SIERRA CINTA - REASERRADORA - 24 PULGADAS
PARTE: 2CK-HB600AIs heavy duty and built to last. With its industrial cast iron wheel and table assembly it can handle any job. What makes the bandsaw unique is the capacity to run from ¼” to 2” wide blade allowing you to do intricate curve work as well as resaw timbers to size. The saw wheels are driven by a powerful 5HP motor allowing you to make your cuts with ease. This bandsaw delivers high accuracy for maximum production along with a simple design that assures minimum maintenanc...
-500x500.png)
AMXmachinery1
SIERRA TRONZADORA
PARTE: 4ST-TR 350 - SIERRA TRONZADORA CUT OFF SAWS WITH ASCENDING BLADECLASSIC TOOLS FOR SAWINGIs a cut off saw that was born out to meet the crosscutting needs of small and large industries.Thanks to a pneumatic saw unit drive with bimanual hand-saving control, a motor power of 3 kWand a 350 mm diameter blade it can cut up to 80 mm thick and 210 mm wide.Technical dataBlade diameter 350 mmBlade rotation speed 3000 rpmBlade motor p...
-500x500.png)
AMXmachinery1
DOBLADORA DE METAL 8' X 10 GA
DOBLADORA DE METAL 8' X 10 GA PARTE: 2GM-0810EThis machine has a 4HP Motor, rated at 220V three phase. Power bending roll up/down with push button & display.SO 9001 certifiedTaiwan machinesAll (3) rolls are hardened rolls, up to 50-52 HRC3-rollers are driven to perform high accuracyAdjustable cone attachment included3/8”, ½” and 5/8” grooves on rollersOne wheel one-side operated for bending rollOne wheel one-site operated for pinch roll (E model...