Identificador: 2958
Abierta
ID de articulo : # 2958 se ha agregado a su lista de deseos.
Descripción
PARTE: 2LA-6000 - LIJADORA EN SERIE
Will brush sand and/or wire brush parts with standard widths from 25 to 73 inches. It has 1 to 6 spindles which will accommodate sanding or wire brushes up to 14 inch diameter. It has a fixed height conveyor and accommodates parts up to 9 inches thick.
- fully customizable to suit shop needs
- designed with a small footprint
- ideal for sanding long thick parts
- rugged
- dependable
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
MANGUERA PARA COLECTORES DE ASERRIN
PARTE: 2EX-HT-CVD0312 - MANGUERA PARA COLECTORES DE ASERRIN Heavy duty .030 clear PVC wired-reinforced dust collection hose is typically used for all types of wood dust and chips in most woodworking applications, available in diameters from 3 to 10 inches.
-500x500.png)
AMXmachinery1
SIERRA OPTIMIZADORA - CORTES RECTOS
PARTE: 4ST-FAST 500 MATRIX - SIERRA OPTIMIZADORA - CORTES RECTOSAUTOMATIC HIGH SPEED CROSSCUT SAW WITH ELECTRONIC PUSH-FEEDMATRIX, A STROMAB PHILOSOPHY Is a crosscut saw electronically pusher-controlled with complete optimisation and defection of wood.An optimal solution for all requirements in 90° up-cutting, it can work with either single bar and stack.Thanks to its specific cutting unit, it can perform a cutting cycle in 2 seconds and in relation to the cutting listcan produce up to 40% mor...
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350M - ENCHAPADORA DE CANTOS -23 FPM - 0.4 - 3 MM - PREMILL Entry level with pre-milling that is the perfect blend of quality and affordability. With fine attention to detail and quality componentry, can output high quality edges on cabinet parts and more. The pre-milling diamond cutterheads machine the panel just prior to applying the glue to ensure optimum edge quality prior to applying the edge tape. Additionally, the machine is equipped with end trimming, flush tri...
-500x500.png)
AMXmachinery1
ESPIGADORA Y MORTAJADORA - 6 EJES
PARTE: 2PI-MMTX - ESPIGADORA Y MORTAJADORA - 6 EJESIs a dual carriage, 6 axis CNC controlled Miter Mortise and Tenon Machining Center – tailored specifically to meet high-volumeproduction requirements.Elimination of complicated machine setups climb cut of both tenon and mortise cuts for a “tear out” free cut.Climb cut of both tenon and mortise cuts for a tear out free cut.The ability to cut MDF paper or vinyl wrapped profiles.Eliminates the need for applying inlays.Reduces the maintenance...