Identificador: 2602
Abierta
.PNG)
.PNG)
.PNG)
.PNG)
Descripción
PARTE: 2GM-0425E - DOBLADORA DE METAL 4' X 1/4''
Capacity: Mild Steel Stainless Steel soft aluminum min. thickness |
4'3" x 1/4" 4’3” x 3/16" 4’3” x 1/2" 26Ga. |
| |
| Roll Dia. | 6 1/4" |
| Min. Bending Dia. Inch | 8 1/4" |
| Pre-bend inch | 0.25" |
| Rolls Speed ft/min | 20 |
| Rolls Opening | 1/2" |
| Main Motor | 4HP 3PH 220V or 440V |
| Weight | 3,850 lbs. |
| Overal Dimensions | 78" x 33" x 52" |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ESPIGADORA DOBLE
PARTE: 3RE- D60M - ESPIGADORA DOBLE Professional solution for volume producing two ends profile of panel furniture, door, solid wood floor, solid wood composite floor, PVC floor, MBF floor, wood-plastic composite with max thickness 85mm.Characteristic1. Each spindle can rotate , convenient to achieve angle-truncate , tenon, groove and etc2. Can hoggers on cut-off saw that can discharge waste material more helpfully3. Adopted widen by high precision linear orbit, machine can run in precision ...
AMXmachinery1
SIERRA MULTIPLE
PARTE: 2CK-MRS12FEATURESThe Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stabilityStraight line caterpillar feeding with heavy guided chain with rubber inserts. Chain blocks are special cast iron with heat treated & precision ground pinsNickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve3 sets of Anti-Kickback Fingers 2 top, 1 bottomPowered Rise & Fall to the pressure rollersNew style round Fence Bar support with quick shift lo...
AMXmachinery1
TALADRO MULTIPLE - 46 DOBLE FILA
PARTE: 2JG-MAG-SYSTEM46 - TALADRO MULTIPLE - 46 DOBLE FILAProvides (2) 23-spindle heads on 32 mm centers; distance between first and last spindle center of each head is 27-23/32" (704 mm).Front end adjustment for quick and easy set-up.(2) 1.5 HP 2,800 RPM motors; max.Boring depth is 2-1/16" (55 mm).Side depth counter system; extractable 400 mm support rollers for long panels.Maximum distance between heads is 25-19/32" (650 mm) and minimum width is 5-1/8" (130 mm).Complete with: 46 quick cha...
-500x500.png)
AMXmachinery1
SIERRA DE PANELES 1600MM
PARTE: 3HO-MJ6116 - SIERRA DE PANELES 1600MMThe sliding table saw for longitudinal, transverse and angular cutting of panel materials (MDF, fibreboard, chipboard and glued panels) faced and laminated, as well as blanks made of solid wood, with preliminary trimming of the lower edge to prevent chipping. It is possible to cut blanks individually or in batches, as well as to tilt the saw unit up to 45° in the vertical plane.Table Guide Length*Width1600mm * 375mmMax. Cutting Height at 90° 80mmM...