Identificador: 1792
Abierta
Descripción
PARTE: 2CK-MRS12
FEATURES
- The Frame is Cast Iron, all the main parts are enclosed, ensuring protection and perfect stability
- Straight line caterpillar feeding with heavy guided chain with rubber inserts. Chain blocks are special cast iron with heat treated & precision ground pins
- Nickel chrome steel Saw Arbor with 70 mm OD – dble. keyed quick removal sleeve
- 3 sets of Anti-Kickback Fingers 2 top, 1 bottom
- Powered Rise & Fall to the pressure rollers
- New style round Fence Bar support with quick shift long fence
- Automatic Centralized lubrication system
- Automatic Star-Delta Starter (slow speed start) and low voltage controls
- C.E style European guard & safety features
- Long fence for control of long material
- Automatic star-delta starter (slow soft-low amperage start) and low voltage controls
- Electrics to 230/460 or575 volts 3 phase 60 cycles – as required to UL/CSA Standards
- With 3 rubber coated hold down rollers at outfeed end of machine
- Overload protection device – Feed speed will slow down automatically if saw motor becomes overloaded
|
Maximum working thickness |
3 3/8” (85mm) with standard pressure shoe *2 ¾” (70mm) with short stock attachment: |
|
Minimum Length |
12” with short stock attachment |
|
Saw Sleeve Usable Length |
|
|
(between outside saws) |
12″ (305 mm) |
|
Sawblade Dia. |
200 to 305mm (8” to 12”) |
|
Saw arbor Sleeve OD (Diameter) |
70 mm |
|
Saw arbor diameter |
50 mm |
|
Saw arbor vertical adjustment |
3.6” (90 mm) |
|
Saw Motor HP |
60 HP 460 volt |
|
Powered Pressure Rollers(Rise/Fall) |
½ HP motor |
|
Saw Arbor Speed |
3800 RPM |
|
Feed Speeds |
25 – 100 FPM |
|
Feed Motor HP |
3 or 5 HP |
|
Voltage |
Machine
can be ordered 230,460, |
|
Table Size |
30” x 60″ |
|
Table Height from floor |
33.5″ |
|
Net Weight |
4510 lbs. |
|
Machine Dimensions |
82.68” 59” x 56 ½” |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
TALADRO MULTIPLE EN LINEA
TALADRO MULTIPLE EN LINEA 2CK-JB21PIs designed to speed up your line drilling operations. It has a total of 21-spindles based on a 32mm centers. The spring-loaded index pin allows for accurate and convenient continuous line drilling operations. The precision rear aluminum fence with linear scale and (2) flip stops allow for precise and convenient setup. The complete back fence can be adjusted for various measurements from the edge of the panel to the holes. The precision ...
AMXmachinery1
LIJADORA DE BANDA ANCHA HEAVY DUTY - 1 A 4 LIJAS
PARTE: 2CK-PRExcel in high production environments and in demanding wide belt sanding applications. Are available with 1-4 sanding units and in widths of 24”, 36”, 43”, and 51”. Sanding units can be rubber or steel contact drums, or combination sanding units (drum/platen) to suit production needs. The digital thickness control allows for precise adjustment of the conveyor belt to 0.001” resolution (0.01mm). Special emphasis has been made for safe operation of this machine with em...
AMXmachinery1
CORTADORA DE METAL ESTILO GANG
CORTADORA DE METAL ESTILO GANG PARTE: 2GM-PS-4816GT48” x 16 Ga, Gang Type Metal Slitter, Powered Slitter, 220V,1 phasewith NC programmable cut to length, 5” touch screenISO 9001 certifiedAmerican design and Taiwan quality machineSlit and cut to length in one unitNC programmable cutting length, 100 job memory featureSingle cycle Mode-manual shearing with foot pedal when programmed length is reach for each cut.Auto cycle mode-shearing will auto cycle the programmed cut lengt...
AMXmachinery1
LIJADORA DE BANDA ANCHA - 36 PULGADAS
PARTE: 2CK-C371Is compact and versatile with a combination sanding unit for calibration and final sanding. The robust sanding unit and heavy-duty frame ensures optimum sanding results. Motorized thickness adjustment with digital thickness control for fast and accurate table adjustment.Accurate digital thickness control with both Inch & Metric settings allows operator to key in the desired thickness and table will automatically move into position.Small footprintCombination sanding unit with 5...