Identificador: 2610
Abierta
.PNG)
.PNG)
.PNG)
Descripción
DOBLADORA DE METAL 4' X 1/4'' PARTE: 2GM-HBR-0425
4 foot plate rolls are made for bending and rolling 1/4" metal sheets or plates into cones and other cylindrical shapes. All three rolls are hydraulic driven, hardened, and made of high grade alloy steel. Equipped with a cone attachment, LED digital readout, operation pedal controls safety line, and a quiet hydraulic system.
- ISO 9001 certified
- Taiwan Machines
- All three rollers are driven
- All three rollers are hardened, up to 50-52 HRC
- Easy swing –out top roller
- Standard cone attachment installed
- 1 each LED indicator for bending roll position
- Safety line all around the machine for emergency stop
- Heavy Duty all steel welded machine construction
- German Hydraulic logic system centrally located and quiet
- Bending roll is hydraulic powered up/down & tilting adjustment
- Planetary reduction gear and pump
- All three rolls are made of high grade alloy steel
- All rolls run forward and reverse
- Safety type foot pedal control
- Overload protection and disconnect switch
- Power source 208V/220V, (Option 460 V , 3 phase)
- LED indicator for bending roll position
- Safety line all around the machine for emergency stop
- Removable safety foot pedal and tool box
- Cone attachment (to make cone parts)
- (3) grooves 3/8”, ½”, 5/8” on roll for bending wire
Roll Capacity: Mild Steel Stainless Steel soft aluminum min. thickness
|
4' x 1/4" 4' x 3/16" 4' x 3/8" 22Ga
|
| Min. Roll dia. | 8" |
| Rolls Length | 4' 3" |
| Rolls Dia. | 6" |
| Pre-bend | 0.18" |
| Rolls speed | 5 RPM |
| Rolls Opening | 2 1/2" |
| Oil Tank Cap. | 12 Gal. |
| Main Motor | 3 HP, 220V/ 10A or 440V/5A |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
LIJADORA DE MOLDURAS
PARTE: 2LA-260 - LIJADORA DE MOLDURASIf you need to sand big or odd-shaped parts, sealer sanding or white wood sanding – this machine is for you! It features inverter-controlled variable speed spindles, and vertical adjustment.this machine can sand just about anything! not just wood and painted wood, metal too!designed for flexible brusheshandles odd-shaped parts and big parts
-500x500.png)
AMXmachinery1
INSERTADORA DE PERNOS
PARTE: 2PI-H49 - INSERTADORA DE PERNOSIs a horizontal point to point bore and dowel insertion machining center.It is designed to CNC position the spindle, bore a hole, then CNC position the inserter, inject glue or water (for pre-glued dowels), and fire the dowel into the hole.Elimination of complicated machine setupQuick, accurate assemblyGain production times on CNC routers and point to points by shifting boring and doweling
AMXmachinery1
PARTE: 2CK-J127LH - CANTEADORA - 12" ANCHO
PARTE: 2CK-J127LH - CANTEADORA - 12" ANCHOIs a truly industrial long bed jointer capable of producing perfectly jointed material used in the production of wood furniture, doors, face frames. and more. The heavy-duty cast iron infeed & outfeed table and back fence provide superior vibration damping which results in an optimum jointed finish. The spiral insert cutterhead with its two-sided solid carbide inserts provides optimum stock removal with a superior finish. The insert knife cutterhe...
-500x500.png)
AMXmachinery1
TORNO 14'' X 40''
TORNO 14'' X 40'' PARTE: 2GM-1440BGF-3ISO 9001 certifiedLifetime Tech Support by phone and videoFull Geared-head precision Metal Lathe with foot brakeQuick-change gearbox with fast and easy threading set up3 HP heavy duty main motor runs on 220V Single-Phase power1.5” Spindle boreSpindle Nose D1-4 CamlockHeavy Duty guideway; 7.5” width8 spindle speeds ranging from 70-2,000 RPM56 kinds of imperial threads44 kinds of metric threadsSpindle is balanced, ...