Identificador: 2845
Abierta
.PNG)
.PNG)
.jpg)
.PNG)
Descripción
PARTE: 2MK-CBC.MR - ENCHAPADORA DE CANTOS
Has a built-in retractable extension table providing a work area 3x times longer whenever opened, it is perfect for long pieces such as doors and panels and it has 6 speeds allowing the operator to work as fast as he wants.
WORK AREA
Whenever opened the extension tables will give you 3x the regular work area of the machine.
6 PARAMETERS
With 6 speeds to chose from the feeder switch will work on your desired velocity.
| Technical Information | |
|---|---|
| Electrical specs | 1 Phase 110 V 1500 W 60Hz |
| Motor specs | 24 V 10 Amp |
| Manual Feeding Speed | 0 - 26ft/min |
| Max edgebanding Height | 3" |
| Edgebanding Coil Support Diameter | 19 1/2" |
| Tape Thickness | 0.4 - 2mm |
| Edgebanding Material | Melamine /PVC/ABS/PP/ VEENER non-fleeced |
| Glue Pot Capacity | 1.5 lbs |
| Recommended Glue Temperature Range | 130° to 180º C |
| Glue Pot Tape | Granulated Hot-Melt |
| (Extensions) Machine Dimension LxWxH | (101 3/4") 48 1/2" x 35 1/2" x 43" |
| Shipping Dimension | 43" x 30" x 50" |
| Weight | 240 Lbs. |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...
-500x500.png)
AMXmachinery1
PARTE: 2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEK
PARTE:
2CK-GT400BRD - CEPILLO 2 CARAS - 16” ANCHO X 6.7” ALTO - ESPIRAL - CANTEKHas a robust cast-iron body for industrial planing day in and day out. The spiral insert knife cutterheads produce a smooth planed finish with maximum stock removal. The material is passed over the bottom head with a spring-loaded pin feed system while the infeed bed is adjustable to determine how much material is removed. The final thickness is keyed in the digital control and the top head & feed assembly...
-500x500.png)
AMXmachinery1
LIJADORA DE MOLDURAS
PARTE: 2LA-230 - LIJADORA DE MOLDURASIs a two spindle machine designed for use with flexible brush type sanding wheels. The spindles adjust individually, with vertical, horizontal, tilt and rotation. It can be placed at the outfeed end of a moulder, over a table, or used to sand free-hand.designed for flexible brushesfully adjustable individually, with vertical, horizontal, tilt, and rotation.
-500x500.png)
AMXmachinery1
COLECTOR DE POLVOS - 3HP
COLECTOR DE POLVOS - 3HP - 2CK-UFO102BIs ideal for the small shop looking to collect wood dust or for the larger shop to provide additional dust collection beyond the capacity of their central system. The upper and lower bags are made of cotton and help filter the collected air before it is recycled into the shop and also collects the dust for disposal. The base is mounted on casters so it can be taken to where it is needed in the shop.3HP generating 1883 CFMBase is mounted on casters so...