Identificador: 2846
Abierta
Descripción
PARTE: 2MK-CBC.E - ENCHAPADORA DE CANTOS
Is designed for convenience, portability, and efficiency. It has retractable legs for easy transportation. Works with edge banding tape width up to 3” and thickness 0.3mm -2mm. The built-in manual cutter provides a precise cut of the tape. With a digital temperature control panel, you can easily control the glue temperature and the glue pot capacity is 1.5 pounds (700 grams).
A spiral bar raises the glue from the glue pot and flows back down, similar to a fondue fountain. It uses low temperature pellet glue, recommends glue that work in the range of 130° up to 180° Celsius.
| Technical Information | |
|---|---|
| Electrical specs | 1 Phase 110 V 1500 W 60Hz |
| Motor specs | 24 V 10 Amp |
| Manual Feeding Speed | 18ft/min |
| Max edgebanding Height | 3" |
| Edgebanding Coil Support Diameter | 19 1/2" |
| Tape Thickness | 0.4 - 2mm |
| Edgebanding Material | Melamine /PVC/ABS/PP/ VEENER non-fleeced |
| Glue Pot Capacity | 1.5 lbs |
| Recommended Glue Temperature Range | 130° to 180º C |
| Glue Pot Tape | Granulated Hot-Melt |
| Max. Machine Dimension | 47" x 31" x 42" |
| Shipping Dimension | 32" x 22" x 20" |
| Weight | 114 Lbs. |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
EXTRACTOR DE POLVOS - FILTRO - 2 SECCIONES
PARTE: 2EX-DCF-218 - EXTRACTOR DE POLVOS - FILTRO - 2 SECCIONESTyphoon offers 2 sections baghouse sock filter in open or enclosed models. Both of these models have 9 1-micron, 6-inch filter socks per section with a 16 inch inlet port to fit the magnum series dust collectors. The open model should not be used in direct exposure of rain or water, while the enclosed model is for outdoor use.
-500x500.png)
AMXmachinery1
TORNO 16'' X 40''
TORNO 14'' X 40'' PARTE: 2GM-GML-1440HDThe 14" x 40" Gap Bed Lathe with SINO DRO is the best machine money can buy. Fully equipped with a Taper Attachment, 8” 3-jaw chuck with one set reversible jaws, 10” 4-jaw chuck, 12” Face plate, 5 1/2” large steady rest with roller jaws, 2” follow rest, 4-way tools post, Foot brake Coolant system, and so much more list. ISO 9001 certifiedLarge spindle bore 2-1/16”Heavy Duty spindle D1-6One-piece so...
-500x500.png)
AMXmachinery1
SIERRA OPTIMIZADORA - CORTES RECTOS
PARTE: 4ST-TR500/F MATRIX - SIERRA OPTIMIZADORA - CORTES RECTOSAUTOMATIC CROSSCUT SAW WITH ELECTRONIC PUSH-FEEDMATRIX, A STROMAB PHILOSOPHYIs a crosscut saw electronically pusher-controlled with complete optimisation and defection of wood.An optimal solution for all 90° up-cutting requirements, it can work with either single bars or packs.This special configuration integrates the notching unit, turning it into a true machining centre combining cutting and milling.The push-feed is built with a r...
AMXmachinery1
ROUTER DE PEDESTAL - 7.5 HP
PARTE: 2CK-SR750Is the ideal solution for high volume routing and profiling of repetitive shapes. With its powerful 7.5 HP router which turns at an RPM of 10000 or 20000 RPM you can cut through solid wood or panel products with ease. Simply follow your profile with one of the guide pins included (1/4”, 3/8”, ½”) for fast and convenient routing operation. The machine is constructed with a solid welded steel frame and cast-iron tilting table. The large solid table is fitted with a s...