Identificador: 2846
Abierta
ID de articulo : # 2846 se ha agregado a su lista de deseos.
Descripción
PARTE: 2MK-CBC.E - ENCHAPADORA DE CANTOS
Is designed for convenience, portability, and efficiency. It has retractable legs for easy transportation. Works with edge banding tape width up to 3” and thickness 0.3mm -2mm. The built-in manual cutter provides a precise cut of the tape. With a digital temperature control panel, you can easily control the glue temperature and the glue pot capacity is 1.5 pounds (700 grams).
A spiral bar raises the glue from the glue pot and flows back down, similar to a fondue fountain. It uses low temperature pellet glue, recommends glue that work in the range of 130° up to 180° Celsius.
| Technical Information | |
|---|---|
| Electrical specs | 1 Phase 110 V 1500 W 60Hz |
| Motor specs | 24 V 10 Amp |
| Manual Feeding Speed | 18ft/min |
| Max edgebanding Height | 3" |
| Edgebanding Coil Support Diameter | 19 1/2" |
| Tape Thickness | 0.4 - 2mm |
| Edgebanding Material | Melamine /PVC/ABS/PP/ VEENER non-fleeced |
| Glue Pot Capacity | 1.5 lbs |
| Recommended Glue Temperature Range | 130° to 180º C |
| Glue Pot Tape | Granulated Hot-Melt |
| Max. Machine Dimension | 47" x 31" x 42" |
| Shipping Dimension | 32" x 22" x 20" |
| Weight | 114 Lbs. |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX550AU - ENCHAPADORA DE CANTOS - PORTATIL
PARTE: 2CK-MX550AU - ENCHAPADORA DE CANTOS - PORTATIL Is a versatile portable solution for the hobbyist or industrial user. It is capable of edgebanding radius or straight workpieces and can be operated as a handheld unit (standard) or a stationary system with the optional table accessory. The edgebander is equipped with a glue pot which uses granulated hot melt glue with an operating temperature range from 120oC to 200oC (250oF to 390oF). Th...
-500x500.png)
AMXmachinery1
SIERRA VERTICAL - 74" ALTO X 64" ANCHO
PARTE: 2SS-C5 - SIERRA VERTICAL - 74" ALTO X 64" ANCHOThe portable panel saw features a 64″ maximum crosscut and cuts material up to 1.75″ thick. Photos are shown with a stand and wheels, which are optional accessories.Motor Horsepower, Amperage and Volts3.25 HP, 15 amp, 120 Volt3.25 HP, 7.5 amp, 220 VoltStandard EquipmentZinc plated 1 ¾” steel guide tubes.Milwaukee Tool motor4 Nylatron roller bearing systems.Adjustable vertical and horizontal rulers.Quick change from vertical to horizo...
AMXmachinery1
ALIMENTADOR - REASERRADORA
PARTE: 2CK-AF19NIs designed to allow consistent and automated feeding of material through vertical bandsaw or resaws. Is pneumatically actuated by a switch in the fence so no foot pedal is required making for a simple and convenient operation. With 10 feed speeds to choose from you can dial in the optimum feed speed for your material. Intended to be fit on bandsaws which are over 24” but could be fitted on smaller bandsaw tables, but may require an extension off the side of your bandsaw ...
-500x500.png)
AMXmachinery1
LIJADORA DE BANDA - 8"
PARTE: 2RI-R258 - LIJADORA DE BANDA - 8"Description:The entire platen assembly raises and lowers to give the operator use of the entire belt surface. Designed for use with edge finishing devices common to the furniture and custom woodworking industry. The ability to use the machine for a variety of edge finishing applications makes this the industry’s most universal edge belt sander.Standard Features:Single Sided Ground Steel Platen6-Way Adjusting Front TableSwing Away Safety Dust Hood with 6...