Identificador: 196
Abierta
Descripción
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS
- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- The feed of edging material, by strip or coil is automatic and synchronously with panel feed.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Gluing Unit: With the use of melt glue applied on straight Panel for edges banding.
- Double End Trimming Unit: Application for fine trimming front & rear edge by HIGH FREQUENCY saw motor
- Edge Trimming Unit: This top and bottom edge trimming unit is complete by cutter heads with two independent HIGH FREQUENCYmotors
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
| SPECIFICATIONS | EB-3ESB |
| Edging PVC Band Thickness | 0.0015” ~ 0.118” (0.4 ~ 3 mm) |
| Edging Band Width | 0.55” ~ 2” |
| Work Piece Thickness | 0.47” ~1.77” |
| Work Piece Minimum Length | 11” |
| Work Piece Minimum Width | 3.5” |
| Edge Band Feed Motor | 25 W |
| Gluing Motor | 60 W |
| End Trimming Saw Speed | 12000 RPM |
| End Trimming Motor | ½ HP |
| Edge Trimming Cutter Speed | 12000 RPM |
| Edge Trimming Motor | ½ HP x 2 |
| Polish Wheel Speed | 1400 RPM |
| Polish Motor | 1/8 HP X 2 |
| Feed Speed | 0 ~ 23 FPM |
| Feed Motor | ½ HP |
| Heating Element Power | 1250 W |
| Total Power | 4 HP (3 KW) |
| Power | 220V 3PH |
| Air Pressure | 90 PSI |
| Machine Size | 87" x 28" x 48" |
| N.W. | 950 LBS |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
DEBARKER CAMBIO 30”
PARTE # 11606 - DEBARKER – SODERHAMN/KOCKUMS - CAMBIO RING 30”EN BUENAS CONDICIONES DE OPERACIONSimple band style ring tensionHydraulic powered feed rolls
AMXmachinery
PART: 1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE AND STOP
PART:
1AM-3011-E – ROLLER STAND - INFEED - OUTFEED - 120 CM (47”) LENGTH - WITH GUIDE
AND STOPSIDE
ROLLER TABLES Use
with saws, planers, edgebanders, jointers, etc.New
with warranty120
cm (47”) length x 39 cm (15.35”) widthVariable
height 83 - 87 cm (32.5 - 34.25”)Support
large and heavy wood pieces and wood panelsAdjustable
heigh to pair with your current machines7 galvanized steel ball bearing rollers-
1 back guide to avoid material to fall-
1 block stop to make same size ...
AMXmachinery
ENCHAPADORA CURVOS
PARTE # 12C-EB-1 - ENCHAPADORA CANTOS CURVOSPOTENCIA MAXIMA: 3500 WATTSVOLTAJE: 220 VOLTSVELOCIDAD DE TRABAJO: 4 METROS X MINUTOTEMPERATURA DE OPERACIÓN: 150-230 ºCALIMENTADOR: RODILLO DE HULEPROTECCIÓN: BAQUELITAMESA: PLACA 3/16ADHESIVO: HOT MEALPESO APROXIMADO: 180KGPARO DE EMERGENCIA2 ZONAS DE CONTROL DE TEMPERATURAPIRÓMETROS ANALOGOBASTIDOR: PLACA CA 10TRANSMICION: ENGRANESTERMOSTATOCONTROL DE ARRANQUETERNOPAR: TIPO J
AMXmachinery
RECIPROCANTE 43"
PARTE # 2TA-TS-HACDE – RECIPROCANTE – 43” ANCHONueva con garantiaAuto Clean Flat-Line Spray MachineTechnical data: (Each Set)A. Machine Size L6442 x W3700 x H2700mmB. Conveyer 1 lot- Loading Conveyer Belt & roller type- Spray Conveyer Belt type- Belt Cleaning Unit (for over spray cleaning)- Conveyer Speed 1~4M/min- Speed Control InverterC. Reciprocator 1 lot- Power 2KW- Speed 1~1.8M/sec.- Speed Control Servo Motor- Valuable Stroke 1100mmD. Spray Booth 1 lot- Size L2250 x W3700 x H2700mm- P...