ID: 196
Open
Description
PARTE: 2TA-EB-3ESB - ENCHAPADORA DE CANTOS
- Automatic feed station for: Gluing, Front & Rear End Trimming, Top & Bottom Edge Trimming, Top & Bottom Edge Polishing,
- Total enclosure covers with dust hood connector.
- Heavy and rigid construction to ensure necessary accuracy and stability.
- To guarantee straight-line feed of the panel, a double row of rubber rollers is off centered onto top pressure beam and bottom feed track with rubber calibrated pads is running on cylindrical guide.
- The top pressure beam is supported with two reinforced columns are equipped with visible linkages for thickness adjustment.
- The feed of edging material, by strip or coil is automatic and synchronously with panel feed.
- Extension rollers support for wider panels.
- The electric and pneumatic system is incorporated in the built-in control cabinets.
- Side Pressure Unit: Standard with one row of vertical rollers for straight edges.
- Gluing Unit: With the use of melt glue applied on straight Panel for edges banding.
- Double End Trimming Unit: Application for fine trimming front & rear edge by HIGH FREQUENCY saw motor
- Edge Trimming Unit: This top and bottom edge trimming unit is complete by cutter heads with two independent HIGH FREQUENCYmotors
- Polishing Unit: Apply the finest finish surfacing process on top and bottom edge.
| SPECIFICATIONS | EB-3ESB |
| Edging PVC Band Thickness | 0.0015” ~ 0.118” (0.4 ~ 3 mm) |
| Edging Band Width | 0.55” ~ 2” |
| Work Piece Thickness | 0.47” ~1.77” |
| Work Piece Minimum Length | 11” |
| Work Piece Minimum Width | 3.5” |
| Edge Band Feed Motor | 25 W |
| Gluing Motor | 60 W |
| End Trimming Saw Speed | 12000 RPM |
| End Trimming Motor | ½ HP |
| Edge Trimming Cutter Speed | 12000 RPM |
| Edge Trimming Motor | ½ HP x 2 |
| Polish Wheel Speed | 1400 RPM |
| Polish Motor | 1/8 HP X 2 |
| Feed Speed | 0 ~ 23 FPM |
| Feed Motor | ½ HP |
| Heating Element Power | 1250 W |
| Total Power | 4 HP (3 KW) |
| Power | 220V 3PH |
| Air Pressure | 90 PSI |
| Machine Size | 87" x 28" x 48" |
| N.W. | 950 LBS |
Payments & Returns
- Payment Methods
- N/A
Post Message
Sign in to ask the seller a question.
-500x500.jpg)
AMXmachinery
PARTE: 2QW-F15 - LIJADORA - AIRE COMPRIMIDO - CABEZA OPCIONAL 8”
PARTE: 2QW-F15
- LIJADORA - AIRE COMPRIMIDO - CABEZA OPCIONAL 8”Handy two-handed tool that is suitable for both wood sanding and finishing of impregnating and paints, as well as for polishing and cleaning, and is particularly suitable for manual machining of large surfaces such as furniture Assembled and stacked boards.This product is hand tool only please remember to get the right grit 8" flap wheels for your job.
AMXmachinery
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 14” DIAMETRO - PISTORIUS EMN-14
PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS
DE 14” DIAMETRO - PISTORIUS EMN-14
Usada - Excelentes condiciones - Solo se uso para hacer muestras
2 Motors 2 HP, 208/230/460 Volts, 60 Hz, 3450 RPM
2 Arrancadores Termomagneticos nuevos WEG
Saw harbor
5/8"
Dust exits 2 of
4" diameter, requres aprox. 850 CFM
Air use 72 CFM at
65 PSI based in 15 cycles/min
Table height
36-1/8" (917 mm)
Guia izquierda: 37” largo
Guia derecha: 22” largo
Pneumatic peda...
AMXmachinery
PARTE: 2GB - CUCHILLAS CORRUGADA PARA MOLDURADORAS - TRAMOS 6" LARGO
PARTE: 2GB - CUCHILLAS CORRUGADA PARA MOLDURADORAS, CEPILLOS, CANTEADORAS - TRAMOS 6" LARGOTramos 6” largo x 2.5” ancho x 5/16” espesor - HSS10 piezas en existencia aproximadamentePara hacer las molduras para molduradora o cepillos
AMXmachinery
SIERRA MULTIPLE – NEVA
PARTE:
12174 – SIERRA MULTIPLE – NEVA
Usada – Muy buenas condiciones
Modelo 2006