Identificador: 968
Abierta
Descripción
PARTE: 12132 - ENGOMADORA 1 LADO – 63” ANCHO - QUICK
COMO NUEVA – NUNCA USADA
Width capacity: 63"
Maximum opening: 1-3/4"
Feed rate: 64 FPM (single speed)
8.27" diameter grooved acid and heat resistant SBR rubber covered glue rolls
6.9" diameter hard rubber covered doctor rolls
Glue spread and material thickness are manually adjusted made by turning chrome plated hand wheels
Aluminum drip pan catches clean up water
Powered by 2 HP motor
Includes roll guards and emergency stop bars
Dimensions: 94" W x 37" D x 54" H
Machine weight: 1,600 lbs.
Electrical requirements: 15 amps @ 220 Volt 3-phase
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12495 - AFILADORA DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 950
PARTE: 12495 - AFILADORA
DE CUCHILLAS PARA MOLDURADORA - RONDAMAT 950
USADA – MUY BUENAS CONDICIONES
WEINIG RONDAMAT R-950
MFG: 1999
230V, 3 FASES, 60 HZ
PESO 1200
LBS1 FLECHA INCLUIDA
DE 1.5” DIAMETRO
Magnetic
on/off control
Cleaned,
checked
AMXmachinery
SIERRA OPTIMIZADORA – DIMTER WEINIG S90
PARTE: 12392 – SIERRA OPTIMIZADORA
– DIMTER WEINIG S90
USADA – MUY BUENAS CONDICIONES
Incluye 2 empujadores para ClasificarYear
of Manufacture: 2005Condition:
GoodElectric: 480 Voltage, 60 Cycle, 3 Phase GREAT
PUSHFEED SAW WITH ACCURATE CUTTING, CRAYON DEFECTING OF INBOUND LUMBER UP TO 14'0"
LENGTHS.Working
dimensions: Width 2" to 8"; thickness 3/8" to 2" and length
3' to 14-3/4" (4.5M).Motor:
10 HP saw motor at 4,800 RPM. with 16" saw blade.Feed:
Variable speed PUSH up to...
-500x500.png)
AMXmachinery
REASERRADORA 1 SIERRA 16"
PARTE # 2TA-BS-1616HR - REASERRADORA HORIZONTAL – 1 SIERRANUEVA CON GARANTIASpecificationsBS-1616HRMax. Cutting Capacity16½" x 16-1/8" (420 x 410 mm)Distance Between Blade to Conveyor¼" x 10-5/8" (5 ~ 270 mm)Minimum Cut Thickness¼" (5 mm)Saw Wheel Diameter32" (800 mm) x 2Saw Blade Length231" ~ 231.1" (5860 ~ 5870 mm)Saw Blade Width2" (50 mm)Saw Blade Speed6150 FPMConveyor Belt Sizes (W x L)16" x 165½" (400 x 4200 mm)Feed Speed (Variable)40" (1016 mm)Return Conveyor Size100-3/8" x 24¾" x 3...
-500x500.jpg)
AMXmachinery
LIJADORA DE DISCO Y BANDA
PARTE:
2AR-97181 – LIJADORA DE DISCO Y BANDANUEVA EN SU CAJA ORIGINALPowerful
3.5 amp motorCast
aluminum table tilts to 60° for use with belt or disc6
in. disc for fast stock removalMiter
gauge for sanding angles on workpieceAdjustable
belt sands inside and outside curvesReinforced steel motor housingAC
Volts: 120Accessories
Included: Miter gauge, sanding belt and sanding discAmperage
(amps): 3.5Belt
width”: 4 in.Diameter
disk: 6 in.Horsepower
(hp): 3/4Speed
(max): 1819 RPM (di...