Identificador: 2395
Abierta
.PNG)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
Descripción
ENLAZADORA DE CAJONES AUTOMATICA 2CK-JDT75
Workpiece Dimensions
Display your quality and are built to last, producing beautifully aesthetic dovetails for drawer box production from a wide range of wood types, including plywood and solid wood. This fully automatic machine produces both the pin and tail of the dovetail simultaneously. All four sides of the drawer can be loaded into the machine for optimum production capacity.
- High-quality finish in both plywood and solid wood drawer box material
- Fast operation with up to 40 drawer boxes produced in an hour
- Solid cast iron machine structure for vibration-free dovetailing leading to a long machine life
- Superior finish with two flute dovetail bit
- 21500 RPM spindle for an extremely fine finish on dovetail joints
- Independent adjustment of both the tenon & the mortise depth for precise fitting of dovetail joints
- Cast iron base to ensure vibration free cutting
- Pneumatic clamping for fast component changeover
- (3) cycle speeds for best finish results
- Automatic lubrication system to spindle stroke
- Dust hood for milling cutter
- Safety rail in front of spindle motor
- Straight or spiral dovetail bits available
Fixed pitch | 25mm |
Spindle speed | 21,500 RPM |
Spindle diameter shank | 0.472” (12mm) |
Spindle motor | 2 HP |
Feed motor | 2 HP |
Electrics | 230/3/60 = 13.6 Full Load Amps |
Feed speeds (3) | 16, 22, 31 cycles/min |
Net weight approx | 990 lbs. |
Shipping weight | 1210 lbs. |
Shipping dimensions | 55.12” x 34.65” x 55.12” |
Workpiece Dimensions
Working length | min. 7.87” (200mm) to max. 59” (1500mm) |
Working width | min. 2.36” (60mm) to max. 16.93” (430mm) |
Vertical material thickness | 0.275” (7mm) to 2.36” (60mm) |
Horizontal material thickness | 0.394” (10mm) to 1.18” (30mm) |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
ASTILLADORA - VERTICAL - 25 X 35 PULGADAS
PARTE: 2TA-WG-2535V - ASTILLADORA - VERTICAL - 25 X 35 PULGADASFeatures:A specially designed with the push ram, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allow...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA Y FRENO 6 PIES
CORTADORA DE METAL HIDRAULICA Y FRENO 6 PIES PARTE: 2GM-HBB-0610Our 6 FT Sheet Metal Hydraulic Box and Pan Brake is a heavy duty hydraulic box and pan brake; constructed of steel for maximum rigidity. Equipped with a robust and quiet German Rexroth hydraulic logic system to clamp your workpiece with ease. Our box and pan brakes are made for simple operation with a conveniently located control panel to place on either side of the hydraulic brake.Taiwan MachinesISO 90...
AMXmachinery1
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD 26” X 120”
PARTE: 2GM-26120 - TORNO DE PRECISION - METAL - CAPACIDAD
26” X 120”
NUEVO
CON GARANTIAISO 9001 certifiedLarge spindle bore 4-1/8”Heavy Duty spindle D1-8Heavy Duty guideway width 16”Heavy Duty main motor 10HP16 spindle speeds from 25-1,600 rpm, 16 speeds54 kinds of inch threads, and 54 kinds of metric threadsThreading and feeding rate change without changing gearsSpindle is balanced, hardened and precision groundSpindle is supported at 3-point by high precision bearings A...
AMXmachinery1
LIJADORA DE BANDA VERTICAL - 6 PULGADAS
PARTE: 2CK-CT108Has a 6” x 108” long belt with 39” wide platen for straight edge sanding and 3” drum for curve sanding. Table are adjustable up and down and can be angled for full belt utilization. This is the ideal edge sander for sanding cabinet door edges, furniture components, and more.Large front table can be tilted and adjusted in height to utilize the full width of the sanding beltSide table is supplied for sanding curved components and can be adjusted in heightRugged heavy gaug...