Identificador: 2897
Abierta
.PNG)
Descripción
PARTE: 2RI-R152 - TALADRO LINEAL CNC - 152 HUSILLOS
Is a woodworking machine that can drill rows of evenly spaced holes in cabinet and furniture components. Drills two rows of shelf pin holes simultaneously. It has 152 spindles arranged in two rows of 76 each, and it can drill a full 8 foot panel with precision and speed. It is designed for closet panel production and features servo driven and programmable through boring, twin ball screw boring stroke control, and right and left hand work stations.
Standard Features
- (2) 76 Spindle Gear Driven Heads
- (6) 3 HP Spindle Drive Motors, TEFC
- 32mm Spindle Centers
- 10mm Bored Collets
- (76) Right Hand, (76) Left Hand
- CNC Table Feed Control
- Electronic Drill Head Squaring
- Foot Actuated Boring Cycle
- Minimum hole spacing: 5” (127mm)
- Magnetic Controls
- Tooling Not Included
Technical Data and Specifications:
- Drive Motors: 3 HP
- Spindle Centers: 32mm
- Collet Size: 10mm
- Throat Capacity: 24"
- First to Last Spindle: 2,400mm (94.488")
- Maximum Material Thickness: 1.25"
- Electrical: 230V, 3Ø, 60Hz, 60A or 460V, 3Ø, 60Hz, 30A
- Air: 2 CFM at 80 – 100 PSI
- Work height: 36″
- Footprint: 54″ x 136″
- Table Area: 30″ x 108″
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
LIJADORA DE BANDA VERTICAL - 6 PULGADAS
PARTE: 2CK-CT108Has a 6” x 108” long belt with 39” wide platen for straight edge sanding and 3” drum for curve sanding. Table are adjustable up and down and can be angled for full belt utilization. This is the ideal edge sander for sanding cabinet door edges, furniture components, and more.Large front table can be tilted and adjusted in height to utilize the full width of the sanding beltSide table is supplied for sanding curved components and can be adjusted in heightRugged heavy gaug...
-500x500.png)
AMXmachinery1
BISAGRADORA - 1.5 HP
PARTE: 2MK-HBM.1000 - BISAGRADORA - 1.5 HPIs a compact, high-precision machine designed for efficient hinge and hardware installation in cabinetry and furniture production. Powered by a 1.5HP motor, it delivers accurate 35 mm hinge cup bores using a carbide-tipped bit—ideal for hinges, mounting plates, and connectors.Technical InformationElectrical specs1 Phase - 110V 13.6 AMPS / 220V 6.8 AMPMotor Specs1.5 HP / 1.1 KW 3400 RPMTable Size18” x 31 - 1/2” | 460 x 800 MMMachine table height5 - ...
-500x500.png)
AMXmachinery1
PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILL
PARTE: 2CK-MX350 - ENCHAPADORA DE CANTOS - 29 FPM - 0.4 - 3 MM - PREMILLCapable of applying up to 3mm thick edge tape on cabinet parts and more. The counter rotating pre-milling cutters ensure optimum panel edge quality and squareness which result in a less visible glue joint. It comes equipped with high frequency motors on both the end trim and top & bottom trim. In addition it is equipped with PVC radius scraping and buffing units. User friendly controls and adjustments allow for effi...
AMXmachinery1
REBAJADORA DE CAJONES
PARTE: 2CK-JEN60Designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers machined per hour.57mm (2 ¼”) wide cutter head...