Identificador: 163
Abierta
Descripción
PARTE: 2LO-CM-100 - 3YC-YOM-120 - ESCOPLO OSCILANTE - 2 MESAS - AMX MACHINERY
Nueva con garantia
- A faster rectangular mortise machine provides variable oscillating speed at 7 ~ 200 strokes per minute.
- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.
- Pneumatic hold down clamps and pneumatic depth movement for smooth finish.
- Fully automatic mortise produce cycles simply by stepping on the foot pedal.
- Hydraulic pistons for drilling depth speed control, enable for best results.
- Width and depth of mortising is easily adjustable.
- Table can be tilted 20 degrees at each side for angular slot.
- Powerful industrial motor for maximum cutting capacity.
- Precision sealed long-life bearing.
- Heavy cast iron frames and table for durability usage.
SPECIFICATIONS | SET-100 | CM-100 |
Max. Width of Tenon (Mortise) | 4" | 4" |
Max. Depth of Tenon (Mortise) | 2" | 2-3/8" |
Oscillation Rate | 13 ~ 80 PCS/MIN. | 7 ~ 200 STROKE/MIN. |
Table Tilts | 20° | 20° |
Spindle Drive Motor | 3 HP | 3 HP |
Cutter Feed Motor | 1 HP | ½ HP |
Cutter Speed | 9500 RPM | 9500 RPM |
Table Vertical Adjustment | 3" | 3" |
Max. Thickness | 4" | 4" |
Max. Stoke Width | 5" | 4" |
Air Pressure | 80 PSI | 80 PSI |
Machine Size | 63" x 51" x 51" | 51" x 47" x 47" |
N.W. | 2200 LBS | 1540 LBS |
G.W. | 2640 LBS | 1880 LBS |
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
SIERRA ESCUADRADORA - 1600 MM
PARTE: 2LO-TS-P1600MA - SIERRA ESCUADRADORA - 1600 MMHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carriage, utilizing alumin...
AMXmachinery
ARMADORA DE MARCOS - ALFA MACCHINE - MITRE-MITE VN4 + MP
PARTE: AMX-10173 - ARMADORA DE MARCOS - ALFA MACCHINE -
MITRE-MITE VN4 + MP
MEMORIA PROGRAMABLE
USADA - FUNCIONANDO
HECHA EN ITALIA
TAMANO DE MESA: 11.75” ANCHO X 22” ALTO
ALTURA DE LA MESA PARA TRABAJAR: 37”
PARA MARCOS DE ESPESOR: 0.197" MINIMO A 3.15" MAXIMO
PARA MARCOS DE ANCHO: 0.39" MINIMO A 3.94" MAXIMO
NECESITA AIRE COMPRIMIDO
ENERGIA: 110V, 1 FASE, 60 HZ
TABLERO: ALFA MACHINNE – MINIGRAF 4 ELECTRONICA – PROGRAMABLE
MEDIDAS MAQUINA: 31” A...
AMXmachinery
TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
PARTE: 2RI-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear
Driven Spindles on 32mm Centers
Index
Pins
3
HP Spindle Drive Motor, TEFC
10mm
Bored Collets
(12)
Right Hand, (11) Left Hand
12″
Throat Depth
60″
Back Fence With (4) Stops
24″
X 48″ Work Table Surface
(2)
Spring Operated Hold Downs
Wired
3-Phase 240/480 Volt, 60 Hz.
Pneumatic
Driven Boring Cycle
Tooling
Not In...
AMXmachinery
ABANICOS DE PEDESTAL - USO RUDO - INDUSTRIALES - TODO EN METAL
PARTE: AMX-10080 - ABANICOS DE PEDESTAL - USO RUDO -
INDUSTRIALES - TODO EN METAL
USADOS - BUENAS CONDICIONES
USO RUDO - INDUSTRIALES - TODO EN
METAL
PATAS, PEDESTAL, ABANICO Y CUBIERTA
DE PROTECCION METALICOS
MOTOR ½ HP, 115V, 1 FASE
COLOR GRIS - DIAMETRO 30”, 24”
COLOR NEGRO - DIAMETRO 29”
MARCA DAYTON Y OTRAS MARCAS