Identificador: 163
Abierta
ID de articulo : # 163 se ha agregado a su lista de deseos.
Descripción
PARTE: 2TA-CM-100 - 3YC-YOM-120 - ESCOPLO OSCILANTE - 2 MESAS - AMX MACHINERY
Nueva con garantia
- A faster rectangular mortise machine provides variable oscillating speed at 7 ~ 200 strokes per minute.
- Two working tables built in both side of the machine to double the production for high efficiency mortising operation.
- Pneumatic hold down clamps and pneumatic depth movement for smooth finish.
- Fully automatic mortise produce cycles simply by stepping on the foot pedal.
- Hydraulic pistons for drilling depth speed control, enable for best results.
- Width and depth of mortising is easily adjustable.
- Table can be tilted 20 degrees at each side for angular slot.
- Powerful industrial motor for maximum cutting capacity.
- Precision sealed long-life bearing.
- Heavy cast iron frames and table for durability usage.
SPECIFICATIONS | SET-100 | CM-100 |
Max. Width of Tenon (Mortise) | 4" | 4" |
Max. Depth of Tenon (Mortise) | 2" | 2-3/8" |
Oscillation Rate | 13 ~ 80 PCS/MIN. | 7 ~ 200 STROKE/MIN. |
Table Tilts | 20° | 20° |
Spindle Drive Motor | 3 HP | 3 HP |
Cutter Feed Motor | 1 HP | ½ HP |
Cutter Speed | 9500 RPM | 9500 RPM |
Table Vertical Adjustment | 3" | 3" |
Max. Thickness | 4" | 4" |
Max. Stoke Width | 5" | 4" |
Air Pressure | 80 PSI | 80 PSI |
Machine Size | 63" x 51" x 51" | 51" x 47" x 47" |
N.W. | 2200 LBS | 1540 LBS |
G.W. | 2640 LBS | 1880 LBS |
Pago y Devoluciones
- Forma de pago
- Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
ENROLLADORA LAMINADOS
PARTE # 2EV-7100 - ENROLLADORA DE LAMINADOS - EVANS 7100 This machine not only rolls your laminate but it also helps you tape or tie the roll and, with our optional tilt takeaway conveyor (7110), gently lowers your heavy roll to the floor.This automated roller takes care to gently wrap the laminate into two different roll diameters for shipping. No more struggling to wrap by hand.This heavy duty machine plugs right into the wall with 110 power and require 90 psi of shop air to operate.110 Vol...
AMXmachinery
PARTE: 12305 - CABEZALES PARA MOLDURADORA - LARGO 5” - FLECHA 1-13/16" - FLECHA 2-1/8"
PARTE: 12305 -
CABEZALES PARA MOLDURADORA - LARGO 5” - FLECHA 1-13/16" - FLECHA 2-1/8"SIN BUJE FLECHA 2-1/8"
USADOS - MUY BUENAS CONDICIONES
North American
Gladu hydro-lock
6 alas
20 grados
Diámetro interior - Flecha: 1-13/16"
Diámetro exterior: 6” (150 mm)
Largo 5” (130 mm)
AMXmachinery
PLANTA DE LUZ 4,500 WATTS
PARTE: 1PWS-4500 - PLANTA DE LUZ 4,500 WATTSMODELOPWS-4500FASESBIFASICAARRANQUEELECTRICOCAPACIDAD MAXIMA4500 WATTSCAPACIDAD NORMAL3600 WATTSVOLTAJE120/240 VOLTSAMPERAJE40 AMPMOTOR7 HP/3600 RPMNIVEL DE RUIDO60 DB @ 7 MTSTANQUE15 LTSFUNCIONAMIENTO AL 50% DE CARGA13 HRSPESO48 KGSCONTIENE KIT DE ARRASTRE
AMXmachinery
SIERRA VERTICAL ELCON TITAN
SIERRA ELCON TITAN CUTTING HEIGHT 3500 MMIt is safe to say that every Elcon panel saw is custom built and hand made in the Netherlands. And every now and then we create a machine that is truly unique due to the specific customer's needs. Behold this TITAN that is made to cut prefab walls of up to 200mm thick. Cutting height is an impressive 3,5 metres high!Would you like to know more? Please contact us.