Identificador: 1249
Abierta
ID de articulo : # 1249 se ha agregado a su lista de deseos.
Descripción
PARTE: 2RI-R19F3 – TALADRO MULTIPLE - 23 TALADROS – VERTICAL – CON PEDAL
Nueva con garantía
23-Spindle
Drill Head
Gear Driven Spindles on 32mm Centers
Index Pins
3 HP Spindle Drive Motor, TEFC
10mm Bored Collets
(12) Right Hand, (11) Left Hand
12″ Throat Depth
60″ Back Fence With (4) Stops
24″ X 48″ Work Table Surface
(2) Spring Operated Hold Downs
Wired 3-Phase 240/480 Volt, 60 Hz.
Pneumatic Driven Boring Cycle
Tooling Not Included
Crated Dimensions: 45″ X 80″ X 78″ H and 740 Lbs
Options
R19F1 – Single Phase Machine
An upgrade to the R113, this unit is foot pedal operated. No more using templates that wear out quickly and lose accuracy. This machine is easily adjustable for entry and exit points, and cleanly allows the user to repeat the drill hole pattern with centering pins on both the left and right hand side of the machine. The rear fence is adjustable for offset from the edge as well. If you’re looking for your first line bore drill, look no further. This machine will give you many years of service with little to no maintenance. This is a clear choice among professionals.
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.jpg)
AMXmachinery
REASERRADORA HORIZONTAL - 2 BANDAS - ANCHO 8” - (2) 15 HP - REGRESADORA
PARTE:
2FA-RM6X6-2 - REASERRADORA HORIZONTAL - 2 BANDAS - ANCHO 8” - (2) 15 HP - REGRESADORA
NUEVA CON GARANTIA- ¼” – 6” Tall Cut Height, 8”
Wide, Unlimited Length Capacity- 4” Dust Connection (No dust
collector required)- Heavy Duty 2-7/16” Blade
Arbors and Bearings- 20” Band Wheels- Air Tensioned Blade
Mechanism- Powered Belt Return w/
Adjustable Height Sheer Plate- Self- contained Hydraulic
System: Adjustable Infeed Speed (0-150 ft/ min)- Easy Crank for Adjustable
...
AMXmachinery
TORNO DESENROLLADOR - ANCHO 100”
PARTE: 11721 - TORNO DESENROLLADOR - ANCHO 100”
2 - TORNO DE DESENROLLO DE 100 PULG (8 PIES) MARCA
WATARAY PARA DESENROLLO CHAPA 8 PIES DE LARGO Y DIAMETRO DE 10 A 40 PULGADAS
CON GROSOR DE DESENROLLO DE 1.0 MM A 4.5 MM CON CAPACIDAD DE PROCESO DE 15,000
PIES2 POR TURNO CON MOTOR DE 40 HP Y MOTOR PARA DIFERENTES MEDIDAS DE TROCERIA
Y POTENCIOMETRO CON CONTROL PARA OPERADOR CON 400 RPM MAXIMO.
AMXmachinery
SIERRA ESCUADRADORA VERTICAL - COMPACT PLUS - CAP. 122” X 65” X 2-3/8”
PARTE: 2ST-COMPACTPLUS - SIERRA ESCUADRADORA
VERTICAL - COMPACT - CAP. 181” X 65” X 2-3/8”
NUEVA CON GARANTIAAll of the above, plus:• 15’1” cut length• Split full-length center shelf useful for
staging material• Y-axis digital measuring for horizontal cuts• Six template bar stops for setting common
rip cutsOptional:- For longer XL (6164) frame to cross-cut
17’6”- For taller (207) frames to cross-cut
6’9-1/2”
- For tallest (220) fr...
AMXmachinery
ABANICOS DE PEDESTAL - USO RUDO - INDUSTRIALES - TODO EN METAL
PARTE: AMX-10080 - ABANICOS DE PEDESTAL - USO RUDO -
INDUSTRIALES - TODO EN METAL
USADOS - BUENAS CONDICIONES
USO RUDO - INDUSTRIALES - TODO EN
METAL
PATAS, PEDESTAL, ABANICO Y CUBIERTA
DE PROTECCION METALICOS
MOTOR ½ HP, 115V, 1 FASE
COLOR GRIS - DIAMETRO 30”, 24”
COLOR NEGRO - DIAMETRO 29”
MARCA DAYTON Y OTRAS MARCAS