Identificador: 3216
Abierta
Descripción
PARTE: 2EX-DCF-218 - EXTRACTOR DE POLVOS - FILTRO - 2 SECCIONES
Typhoon offers 2 sections baghouse sock filter in open or enclosed models. Both of these models have 9 1-micron, 6-inch filter socks per section with a 16 inch inlet port to fit the magnum series dust collectors. The open model should not be used in direct exposure of rain or water, while the enclosed model is for outdoor use.
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
ENCHAPADORA DE CANTO PORTATIL
PARTE: 3HO-HT102A - ENCHAPADORA DE CANTO PORTATILWe can hold the portable edgebander to do edge banding work on fixed board. Also, we can fix the machine on the table, hold the board to do edge banidng work. It is suitable for straight and curve shape boards.Voltage110V/220VMotor Power1200WWorking Speed0-6m/minHeating Time5-10minEdge Banding Width10-60mmEdge Banding Thickness0.3-3mmGlue Pot Volume1000mlHeating Time5-10min
AMXmachinery1
EXTRACTOR DE POLVOS - FILTRO - PULSE JET
PARTE: 2EX-DCF-PJ30 - EXTRACTOR DE POLVOS - FILTRO - PULSE JETAutomatic air pulse to constantly release dust particles from filter media.Maximum CFM up to 14000Reduces fine dust clogging of filtersGreatly reduces maintenanceReduces restriction and greatly improves airflowFilter inlet size: 20″Standard Filtration to 5 microns for general purpose applicationsOptional Filtration to 1 micron for extremely fine or powder like dust particles
-500x500.png)
AMXmachinery1
BISAGRADORA - 1.5 HP
PARTE: 2MK-HBM.1000 - BISAGRADORA - 1.5 HPIs a compact, high-precision machine designed for efficient hinge and hardware installation in cabinetry and furniture production. Powered by a 1.5HP motor, it delivers accurate 35 mm hinge cup bores using a carbide-tipped bit—ideal for hinges, mounting plates, and connectors.Technical InformationElectrical specs1 Phase - 110V 13.6 AMPS / 220V 6.8 AMPMotor Specs1.5 HP / 1.1 KW 3400 RPMTable Size18” x 31 - 1/2” | 460 x 800 MMMachine table height5 - ...
-500x500.png)
AMXmachinery1
ARMADORA DE CAJONES
PARTE: 2CK-JEN60 - ARMADORA DE CAJONES Is designed to both notch and drill drawer boxes to install undermount soft-close drawer slides. The operation of the machine is simple with a self-indexing drilling unit that’s determined by the position of the drawer for either left or right notching. With a cycle time of approximately 10 seconds per drawer, you can achieve a high throughput and save time for other important tasks.High production capacity of up to 220 drawers m...