Identificador: 1876
Abierta
PARTE: AMX-10125 - EXTRACTOR DE TUBO - ASPAS 15” DIAMETRO - MOTOR ½ HP
AMXmachinery
Descripción
PARTE: AMX-10125 - EXTRACTOR DE TUBO - ASPAS 15” DIAMETRO - MOTOR ½ HP
USADO - BUENAS CONDICIONES
MOTOR 1/2 HP, 220/440V, 3 FASES
MEDIDAS: 15” DIAMETRO INTERIOR X 19” DIAMETRO EXTERIOR X 12” FONDO
Pago y Devoluciones
- Forma de pago
- PayPal, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: AMX-10121 - LIJADORAS DE CANTOS - 1 DERECHO Y 1 IZQUIERDO - TEKMAK
PARTE: AMX-10121 - LIJADORAS DE CANTOS - 1 DERECHO Y 1 IZQUIERDO
- TEKMAK
USADOS - BUENAS CONDICIONES
Revisados - Baleros nuevos
Motor ½ HP, 220/440V, 50/60 Hz, 3 fases, 1720 RPM
Medidas totales: 20” largo x 15” fondo c/u
Altura total minima: 17.5” c/u
Altura total máxima: 19.5” c/u
Rueda pulidora: 1.5” ancho x 8” diámetro c/u
Hecho en ItaliaEl banco donde estan puestos actualmente donde se tomaron las fotos no esta incluido
AMXmachinery
ASERRADERO PORTATIL - 14 HP GASOLINA - 31” DIAMETRO
PARTE: 2EB-WP-031-1 - ASERRADERO PORTATIL - 14 HP GASOLINA - 31” DIAMETRO
Nuevo con garantíaEngine: Kohler
Command Pro CH440 - 14HP Electric StartDisplacement:
429CCStart type:
Recoil Electric StartOil capacity:
1.16LCast iron
cylinder liners provide lasting durabilityOil Sentry
automatic low oil engine shutdown systemCutting Capacity:
31" x 7" x 110"Maximum Board
Thickness: 7"Standard Track
Size: 157" x 40.5" ** We have extended track sections if neededPacking Size:
85" x 23" ...
AMXmachinery
CNC TALADRO, ENGOMA, INSERTA – HOMAG WEEKE ABD 100
PARTE: 12063 – CNC TALADRO, ENGOMA, INSERTA – HOMAG WEEKE ABD 100USADA – MUY BUENAS CONDICIONESMODELO: 2010Weeke’s model ABD 100 is designed for small and large capacity horizontal drilling, gluing, and dowel insertion. The ABD 100 is produced by skilled technicians with a long tradition for excellence in engineering and machine building.The Model ABD 100 is built on a heavy-duty base with welded steel construction. The main horizontal beam of the machine holds the carriage for the...
-500x500.jpg)
AMXmachinery
MOLDURADORA 5 CABEZALES
PARTE # 11907 – MOLDURADORA - WEINIG PROFIMAT – 5 CABEZALESCapacity: 9" x 5"Adjustable infeed table and fence 78''1-1/2'' diameter spindlesHead Configuration: Bottom: 15 HP; Right/Left: 15 HP; Top: 15 HP; Bottom: 15 HPSpindle Speed is 6,000 RPMFeed motor: 3HPFeed Speeds infinitely variable 18-72 FPMMotors are 3PH 230/460VYear Manufactured: 1999