Identificador: 465
Abierta
Descripción
PARTE: 1SL-DC-GC3 - GARRUCHA DE CADENA - 3 TON
CAPACIDAD 3 TONELADA
CADENA DE 3 METROS
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
PARTE: 12650 - CEPILLO - 4 CARAS - 24” ANCHO - PINHEIRO
PARTE:
12650 - CEPILLO - 4 CARAS - 24” ANCHO -
PINHEIRO
Usado – Muy buenas condiciones
24" max. planing width
20" max. moulding width
3" min. moulding width
8" max. thickness capacity
16" min. length workpiece unbutted, 9" butt fed
7.5 HP top head
5.5 HP bottom head
side heads are 17.5 HP each
4 HP variable speed feed 20 to 100 FPM
Top and bottom heads are 4-knife straight knife cutter heads
Side heads are 5" dia. X 8" long 4-knife corrugated bac...
AMXmachinery
CEPILLO 4 CARAS – 16” ANCHO - MIDA
PARTE:
12283 – CEPILLO 4 CARAS – 16” ANCHO - MIDA
USADO –
MUY BUENAS CONDICIONESYear 2002Motor Power 37,4 kWVoltage 400 V (three-phase)C.E. YesAbres 4Largueur min/max. Travail 420
mmHauteur min/max. Travail 11 -
300 mmLongueur table travail 1000 mmTotal Nº axis 4Bottom horizontal axis Yes 11
kWDrill right axis Yes 6,6 kWDrill left axis Yes 6,6 kWUpper horizontal axis Yes 13,2
kWVitesse d avance 3-30 m/minDiametre rouleaux avancement
90 mmDrag upper number 3Transmission Type Ca...
AMXmachinery
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTA
PARTE: 12598 - UNIDORA SABANAS CHAPA - FISHER+RUCKLE FZL-34 DELTAUSADA – BUENAS CONDICONESFISHER+RUCKLE FZL-34 DeltaVeneer crossfeed splicing machine with pre-glued veneer sheetsVeneer strip length (in fiber direction) 750 - 3400 mm Veneer strip width (cross to fiber direction) 70 - 600 mmVeneer strip thickness (depending on veneer) 0.3 - 1.5 mmEC standardsYear 1998400V/50HzComplete of:- INTERMEDIATE CONVEYORThe intermediate conveyor serves at the same time as buffer to avoid dead times durin...
AMXmachinery
PARTE: 12577 – CHAFLANADORA - HAZELDINE
PARTE: 12577 – CHAFLANADORA - HAZELDINEUSADA – BUENAS CONDICIONES