ID: 80
Open
Description
PARTE # 2EV-0207 – PINCH ROLLER 62” - RODILLOS SEGMENTADOS – EVANS 0207
62" capacity
Segmented bottom roller for countertop operation
Safety Gates on In-Feed and Out-Feed
Solid Top Roller
Split Bottom Roller
Feed Rate: 50 FPM
Maximum Width: 62”
Maximum Thickness: 2”
Work Height: 30-1/2”
(Optional Riser Available)
Drive Motor: ½ HP
Electrical: 120 V, 1 PH, 60 Hz
Air Requirement: 100 PSI
Shipping dimensions 85” long X 33” wide X 57” high
*Note: Options Listed under 0257 Pinch Roller
Options:
- Variable speed control 0-50, ½ HP DC motor #01667
- Custom Riser Base
- 220 volt 1 phase 50hz
- Up to 4” roll opening
Payments & Returns
- Payment Methods
- Visa/Mastercard/American Express
Post Message
Sign in to ask the seller a question.
AMXmachinery
PLANTA DE LUZ 4,200 WATTS
PARTE: 1PW-4200 - PLANTA DE LUZ 4,200 WATTSMODELOPW-4200FASESMONOFASICAARRANQUEMANUALCAPACIDAD MAXIMA4200 WATTSCAPACIDAD NORMAL3360 WATTSVOLTAJE120 VOLTSAMPERAJE20 AMPMOTOR7 HP/3600 RPMNIVEL DE RUIDO60 DB @ 7 MTSTANQUE15 LTSFUNCIONAMIENTO AL 50% DE CARGA12 HRSPESO43 KGS
AMXmachinery
DESORILLADORAS
DESORILLADORAS LM E25G Edger:- 25 HP Kohler® engine.- 13" carbide tipped split blades.LM E26D Edger:- 26 HP CAT® diesel engine.- 15" carbide tipped split blades. CARACTERISTICAS ESTANDAR:Hydraulic feed of the board through the bladesHydraulic adjustment of the moveable blade and board setworks.4 industrial infeed and 4 outfeed adjustable rollers.7' infeed and 7' outfeed roller bed.Highway approved trailer with 15" tires and 3500 lb. capacity axle.Easy to read scale stick at the front of the ...
AMXmachinery
PARTE: P-VAR-035 - CINTA DOBLE CARA
PARTE: P-VAR-035 - CINTA DOBLE CARA - ½” ANCHO x 50 MMedidas:½” ANCHO x 50 METROS
AMXmachinery
PARTE: 12526 - CENTRO DE TRABAJO CNC - ROVER GOLD 1232
PARTE: 12526 - CENTRO
DE TRABAJO CNC - ROVER GOLD 1232
USADO - MUY BUENAS CONDICIONESNumerically
controlled machining centre ROVER GOLD 1232
Working fields: X = 3.280 mm; Y = 1.260 mm; (electrospindle axis)
Z Clearance = 180 mm with H=74 mm modules – Z Stroke = 364 mm
WORKING TABLE
6
ATS panel supports - L = 1240 mm - 18 sliding bases for vacuum
6
back stops of 115 mm stroke and 26 mm height spacers
...