Identificador: 2854
Abierta
.PNG)
Descripción
PARTE: 2MK-LDF - LIJADORA - 1HP
Can handle a huge variety of tasks. It has a 6”x 11.5” belt, 9” disc and a 1HP motor. The tiltable table 0º to 45º and 0º to 90º disc will allow you to sand pieces in every angle.
| Technical Information | |
|---|---|
| Table size | 6" x 11.5" |
| Table tilt | 0º to 45º |
| Blade tilt | 0º to 90º |
| Disc | 9” |
| Belt | 6”x 48” |
| Belt speed | 1836 SFPM |
| Disc speed | 2510 RPM |
| Motor Specs | 1 HP 1 phase: 110 V – 8 A |
| Weight | 134 Lbs. |
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery1
COLECTOR DE POLVOS - 3- CICLON
PARTE: 2EX- DC-275 - COLECTOR DE POLVOS - 3 - CICLONComes in single and three phase models with 2 1-micron filter bags. It features a 117 square foot filter area with 24 cubic feet of storage capacity measuring 140 inches tall by 120 inches wide by 50 inches deep. The single-phase dust collector is powered by a 3 horsepower Baldor motor has 38 amps at 220 volts while the three-phase dust collector is powered by a 3 horsepower TEFC motor has 20 amps at 220 volts. Drums not included. Magnetic s...
AMXmachinery1
LIJADORA DE BANDA VERTICAL - 6"
PARTE: 2CK-CT108 - LIJADORA DE BANDA VERTICAL - 6"Has a 6” x 108” long belt with 39” wide platen for straight edge sanding and 3” drum for curve sanding. Table are adjustable up and down and can be angled for full belt utilization. This is the ideal edge sander for sanding cabinet door edges, furniture components, and more.Large front table can be tilted and adjusted in height to utilize the full width of the sanding beltSide table is supplied for sanding curved components and can be ...
-500x500.png)
AMXmachinery1
CORTADORA DE METAL HIDRAULICA 4' x 10 Ga
CORTADORA DE METAL HIDRAULICA 4' x 10 Ga PARTE: 2GM-HS-0410MDTaiwan machinesISO 9001 certifiedHD all steel construction for maximum rigidityGerman logic quiet Rexroth hydraulic systemAdjustable stroke from 16-20 strokes per minute60” long squaring arm with inch / mm scaleSpring hold-downs High grade carbon/chrome alloy steel blades and hardened to 62 HRC, 2-edge indexable upper blade and 2-edge indexable bottom bladeFull length with full view finger ...
-500x500.jpg)
AMXmachinery1
PARTE: 3AM-H-330H - SIERRA CINTA PARA METAL - CONFIGURACION ALTA
PARTE: 3AM-H-330H - SIERRA CINTA PARA METAL - CONFIGURACION ALTASaw Band Tensioning Method: ManualCore Components: Gearbox, Gear, Bearing, Engine, MotorApplicable Industry: Machinery Repair Shops, Manufacturing Plant, Farms, Construction Works, Energy &Amp; Mining, Food &Amp; Beverage Shops, OtherCore Selling Point: High-AccuracyBlade Tension: ManualVice Clamping: Hydraulic with ManualCutting Feed: Hydraulic steplessMain Motor(kw): 4Coolant Motor (kw): 0.75Max. Cutting Capacity(mm): R...