Identificador: 3194
Abierta
ID de articulo : # 3194 se ha agregado a su lista de deseos.
Descripción
PARTE: 2EX- XR-14BXL - SIERRA RAJADORA - 1 DISCO - 14" - CAPACIDAD EXTREMA
Details:
- 15 HP Main motor
- Huge 47.5″ x 69″ table available
- 8 full hold down rollers
- Variable feed speeds from 50-120 ft/min
- 9′ Guaranteed Glue Line
- Disc Brakes
- Micro adjust fence with handwheel
- Triple anti-kickback fingers
- 18″ wide ripping capacity
- Automatic Oiler with low-oil warning
- Wye-Delta soft start
- Heat treated chain and race
- Amp meter
- Square D Electrical controls
Specifications:
- Horsepower: 15HP
- Voltage: 230V or 460V
- Phase(s): 3PH
- Blade Size: 14"
- Main Motor: 15 HP
- Feed Motor: 1.5 HP
- Blade Speed: 3600
- Feed Speed: 50 - 120
- Max Rip Capacity: 18"
- Working Height: 33.5"
- Table Size: 39" x 69"
- Dust Collection Requirement: 1000 CFM
- Hold Down Rollers: 8
- Chain Rail Length: 34"
- Chain Pad Width: 7"
- Guaranteed Glue Line Length: 9'
- Set of Anti-Kickback Fingers: 3
- Disc Brakes: Yes
- Oiler System: Auto w/ warning
- AMPS (230V/460V): 45A / 23A
- Max Thickness Capacity: 3"
- Weight: 3200 lbs
Pago y Devoluciones
- Forma de pago
- N/A
Publicar mensaje
Ingresar to ask the seller a question.
-500x500.png)
AMXmachinery1
COMPACTADORA HORIZONTAL DE CARTON
PARTE: 12738 - COMPACTADORA HORIZONTAL DE CARTONAutomatic wire tier is missing on one side.Machines operates in manual mode only, operator must remain in contact with switch while in operationTested and works as it should in manual mode wired, 480VMachine will work as is, but must be manually tied, or run continuously without ties.Unit will need evaluated and programmed to utilize PLC and monitorUpgrades were utilized but look as though they were later abandoned. There is a PLC and Touch screen ...
AMXmachinery1
ASTILLADORA - VERTICAL - 25 X 35 PULGADAS
PARTE: 2TA-WG-2535V - ASTILLADORA - VERTICAL - 25 X 35 PULGADASFeatures:A specially designed with the push ram, powerful crusher for different materials such as wood, MDF, particle board,plastic, rubber, corn cob, etc.Excellent wearing ability and impact-resistant for time & labor saving.Large busting capacity and easy feeding system.The shaft rest for the cutter head is constructed by round hollow with special angle to keep cooling for long hours' usageCutter head angle cutting design allow...
-500x500.png)
-500x500.jpg)
AMXmachinery1
EXTRACTOR -VENTILADOR INDUSTRIAL TIPO TAMBOR
PARTE: 1AM - EXTRACTOR -VENTILADOR INDUSTRIAL TIPO TAMBORDOS TAMAÑOS:VP-30: Aspa de 30″ de diámetroVP-42: Aspa de 42″ de diámetroCaracterísticas principales:*2 velocidades*Potente flujo de aire*30″ y 42″ de diámetro de aspa*Enchufe con borne de protección a tierra*127 volts*Llantas de plástico*Contiene 2 agarraderas, una en cada extremidad, para fácil movilidadUsos:*Ideales para usarse en talleres, bodegas y espacios exteriores.
Modelo
Potencia
WATTS
...