ID: 1335 Open

LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO

AMXmachinery

Description

PARTE: 2DO-PMC-HD – LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO

Nueva con garantía

Heavy duty welded structure. They feature dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys. All models are equipped with a magnetic starter (overload protection) and belt guards.

Maximum Part Length:

Pressure Pad Traveling Bar: 96"

Pressure Pad Traveling Bar Contact Wheel Assembly: 80"

Table size: 30" wide X 96" long

Steel table is covered with Russian Cherry wood plywood surface

Motorized vertical table with 28" vertical adjustment

Table weight capacity: 1000 lb

One Abrasive Belt: 6" X 264", 4750 F.P.M.

Pulleys: 10" dia. X 6.25" face

Pressure Pad Traveling Bar

Hand Held Pressure Device

Magnetic starter with overload protection

Belt guards

Pneumatic tensioner

Sanding belt breaking detector

Dust collector outlet: 6" diameter @ 1200 cfm

Compressed air requirement: 90 psi

5 HP T.E.F.C. motor, 1750 rpm

Voltage: 220 or 440 / 3 / 60, 17 amps

OPTIONS

Single Phase 5 HP motor, 220 volts

Enlarge the table to 48"

Vulcanized Rubber Grooved Contact Wheel Assembly

- (for hairlining & fine graining)

Contact Wheel Assembly with Corrugated Stacked Disks

- (for weld seam removal & rough graining)

Variable speed for a 5 HP Motor:

- Allow belt speed between 3300 to 6300 ft./min.

Six (6) Vacuum cups with individual activation switch, to hold parts

Payments & Returns

Payment Methods: Visa/Mastercard/American Express

Post Message

AMXmachinery

SIERRA ESCUADRADORA 1600 MM

PARTE # 2TA-TS-P1600MA - SIERRA ESCUADRADORA - 1600 MMHeavy duty construction provides vibration free operation. Easy to set up and adjust.Manual raise, lower and tilt of main blade and scoring saw.Scoring unit provides clean, accurate, chip free cutting, ready for edge banding.Sealed main shaft bearings (lubricated for life) with vibration dampening system.Highly accurate, freely moving sliding table with wear resistant guide rails and rollers.Specially designed roller carriage, utilizing alumi...

AMXmachinery

PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 14” DIAMETRO - PISTORIUS EMN-14

PARTE: AMX-10028 - SIERRA DOBLE 45 GRADOS – 2 SIERRAS DE 14” DIAMETRO - PISTORIUS EMN-14 Usada - Excelentes condiciones - Solo se uso para hacer muestras 2 Motors 2 HP, 208/230/460 Volts, 60 Hz, 3450 RPM 2 Arrancadores Termomagneticos nuevos WEG Saw harbor 5/8" Dust exits 2 of 4" diameter, requres aprox. 850 CFM Air use 72 CFM at 65 PSI based in 15 cycles/min Table height 36-1/8" (917 mm) Guia izquierda: 37” largo Guia derecha: 22” largo Pneumatic peda...