Identificador: 1335
Abierta
ID de articulo : # 1335 se ha agregado a su lista de deseos.
LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
AMXmachinery
Descripción
PARTE: 2DO-PMC-HD – LIJADORA DE BANDA - MESA MOVIBLE – 1 BANDA – MOTOR 5 HP - MESA 30”X 96” - USO RUDO
Nueva con garantía
Heavy duty welded structure. They feature dust hoods on both sides, a table with steel rollers and virtually wear free balanced and quiet running aluminum pulleys. All models are equipped with a magnetic starter (overload protection) and belt guards.
Maximum Part Length:
Pressure Pad Traveling Bar: 96"
Pressure Pad Traveling Bar Contact Wheel Assembly: 80"
Table size: 30" wide X 96" long
Steel table is covered with Russian Cherry wood plywood surface
Motorized vertical table with 28" vertical adjustment
Table weight capacity: 1000 lb
One Abrasive Belt: 6" X 264", 4750 F.P.M.
Pulleys: 10" dia. X 6.25" face
Pressure Pad Traveling Bar
Hand Held Pressure Device
Magnetic starter with overload protection
Belt guards
Pneumatic tensioner
Sanding belt breaking detector
Dust collector outlet: 6" diameter @ 1200 cfm
Compressed air requirement: 90 psi
5 HP T.E.F.C. motor, 1750 rpm
Voltage: 220 or 440 / 3 / 60, 17 amps
OPTIONS
Single Phase 5 HP motor, 220 volts
Enlarge the table to 48"
Vulcanized Rubber Grooved Contact Wheel Assembly
- (for hairlining & fine graining)
Contact Wheel Assembly with Corrugated Stacked Disks
- (for weld seam removal & rough graining)
Variable speed for a 5 HP Motor:
- Allow belt speed between 3300 to 6300 ft./min.
Six (6) Vacuum cups with individual activation switch, to hold parts
Pago y Devoluciones
- Forma de pago
- Visa/Mastercard/American Express, Transferencia/Deposito Bancario
Publicar mensaje
Ingresar to ask the seller a question.
AMXmachinery
REASERRADORA HORIZONTAL - 1 BANDA - CON REGRESADOR - GRIZZLY
PARTE:
12561 - REASERRADORA HORIZONTAL - 1 BANDA - CON REGRESADOR - GRIZZLY
Usada - Buenas CondicionesMain motor: 25HP, 220V/440V*
(prewired for 220V), 3-phaseElevation motor: 1/2 HPHydraulic pressure: 1000 PSIBelt Powered Hydraulic Pump -
Main Saw Motor - 25HPMaximum cutting capacity:
10" x 16"Distance from blade to
conveyor table: 1/4"–10"Feed speed: 0–61 FPMSaw blade size: 180" L x
1" WSaw blade speed: 7300 FPMFloor to table height:
40"Infeed table: 106" L x
16" WInfeed belt: 2...
-500x500.jpg)
AMXmachinery
LIJADORA DE BANDA ANCHA – 37” ANCHO – 1 BANDA
PARTE: 2EX-XS-1E37 - LIJADORA DE BANDA ANCHA – 37”
ANCHO – 1 BANDANueva con garantía 60″ belt lengthMono-block construction
increases durabilityDual display digital
thickness controllerOmron electronic eye
sanding belt trackingWye-delta soft startRegal variable speed
drive unitQuality pneumatic
controls by CamozziAutomatic conveyor belt
trackingAuto thickness device
for easy set up Horsepower: 20HPVoltage: 230V or 460VPhase(s): 3PHBelt Size: 37" x
60"CFM Requirement: 1800Ma...
AMXmachinery
SOLDADORA DE SIERRA CINTAS - 20 – 60 mm
PARTE: 4VF-VC6 – SOLDADORA DE SIERRA CINTASReliable, inexpensive and very easy to use.Manual welding and annealing.Shear included.Steel Band Width [min-max]: 20 – 60 mmBand Thickness [min-max]: 0,5 – 1,1 mmPower Absorbed: 4,5 kWNet – Gross Weight: 51 – 72 kgMachine Dimensions [D x W x H]: 49 x 52 x 32 cmPacking Dimensions [D x W x H]: 62 x 82 x 50 cm
AMXmachinery
TORNO COPIADOR MULTIPLE AUTOMATICO BACCI
PARTE: 10443 – TORNO COPIADOR MULTIPLE AUTOMATICO BACCIMarca: BACCIMotor: 5 HP, 220/440V, 3 fases, 3500 RPMTrabaja 4 copias a la vezDistancia maxima entre puntos 1.40 mtsEn buenas condiciones de operaciónIncluye patrones o plantillas en metal disponibles, 20 piezas aproximadamente por confirmarVideo de la maquina trabajando disponible